基于MIDAS/GEN探讨不同填充墙对RC框架结构动力反应的影响
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
在RC框架结构中,目前主要采用的设计方法是按照框架结构进行设计,不考虑填充墙的承载,只是将填充墙的自重当作外荷载施加到计算模型上;抗震计算时,考虑填充墙对框架结构刚度的影响,对框架的自振周期进行折减。这种计算分析方法仅能大致估算填充墙对结构周期的影响,无法考虑不同材料、不同布置等情况下的填充墙对结构影响的差异。本文根据算例基于MIDAS/GEN对不同材料、不同布置的RC框架结构进行动力分析,探讨填充墙对结构动力反应的影响。
In the RC frame structure,the current design method is adopted the frame structure design,do not consider the bearing capacity of fill walls,while fill the dead weight of the wall as a load applied to the calculation model; When we calculate earthquakeresistantion,considering the stiffness of fill walls and the effects of vibration reduction cycle of the framework.This calculation analysis method can only roughly estimate the influence of fill walls in the structure cycle,can't consider different materials,different arrangement of filling the influence of wall structure.This paper based on the MIDAS/GEN discussing the influence of the filling wall in the framework structure about different materials,different arrangement.
引文
[1]郭婷婷,于贵华,徐锡伟.汶川地震灾害特征与建筑物震害原因讨论[J].工程抗震与加固改造,2010,32(4).
    [2]清华大学,西南交通大学,北京交通大学土木工程结构专家组.汶川地震建筑震害分析[J].建筑结构学报,2008,29(4).
    [3]非明伦,周全光,等.2007年宁洱6.4级地震宁洱县城现代建筑典型震害分析[J].地震研究,2007,30(4).
    [4]王亚勇,白雪霜.台湾921地震中钢筋混凝土结构震害特征[J].工程抗震,2001(1).
    [5]GBJ 0011—1989建筑抗震设计规范[S].
    [6]淡浩.填充墙刚度对框架结构抗震性能影响的定量分析初探[J].四川建筑科学研究,2010,36(5).
    [7]GB 0009—2001建筑结构荷载规范[S].
    [8]王昌兴.MIDAS/GEN应用实例教程及疑难解答[M].北京:中国建筑工业出版社,2010.
    [9]北京迈达斯技术有限公司.用户手册[R].
    [10]GBJ 50011—2010建筑抗震设计规范[S].

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心