9度区高层隔震结构设计与分析方法

英文篇名：Design and analysis methods of high-rise isolated structure in area of fortification intensity 9
中文刊名：建筑结构
英文刊名：Building Structure
作者：孙柏锋 ; 王广宇 ; 潘文 ; 陈华
英文作者：Sun Baifeng1 ; Wang Guangyu1 ; Pan Wen2 ; Chen Hua3(1 Kunming Hengji Checking Center of Construction Project Shop Drawing ; Kunming 650011 ; China ; 2 Institute of Earthquake Engineering ; Kunming University of Science and Technology ; Kunming 650504 ; China ; 3 Yunnan Century Sunshine Construct Design Co. ; Ltd. ; Kunming 650011 ; China)
中文关键词：高层隔震 ; 隔震层 ; 剪力墙结构 ; 支座受拉
英文关键词：isolated high-rise building ; isolation layer ; shear-wall structure ; bearings in tension
出版日期：2013-05-25
机构：昆明恒基建设工程施工图审查中心;昆明理工大学工程抗震研究所;云南世纪阳光建筑设计有限公司;
年：2013
期：10
出版单位：建筑结构

摘要

隔震结构所采用的材料与传统抗震结构有很大的不同,设计方法也有差异。以抗震了设防烈度为9度区的某小区高层隔震结构为例,重点介绍了规范对隔震计算分析的相关要求、竖向地震作用计算、支座计算模型选择、支座拉应力分析等内容。分析结果表明,对于支座参数设计合理、各项指标均能满足规范要求的高烈度地区高层隔震结构,上部结构地震响应明显降低,抗震性能也得到很大提高。
The design method and materials used in isolated structure is very different from traditional seismic structure.Taking a high-rise isolated building of fortification intensity 9 as an example,the relevant requirements of computational analysis of isolated structure in specification,the calculation of vertical seismic action,the selection of calculation model and tensile stress analysis for isolation bearings were focused on.The analysis results show that,for isolated high-rise building in high intensity region with rational design of bearing parameters and the indicators meeting the specification requirements,the seismic response of upper structure could be significantly decreased,and the seismic performance could be improved significantly.

引文

[1]GB50011—2010建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.
    [2]党育,霍凯成.多层隔震结构的竖向地震作用研究[J].地震工程与工程振动,2010,30(4):139-145.
    [3]傅金华,日本抗震结构及隔震结构的设计方法[M],北京:中国建筑工业出版社,2010.
    [4]日本建筑学会著.隔震结构设计[M].刘文光,译.北京:地震出版社,2006.
    [5]杜永峰,李慧.双向地震激励下隔震结构抗倾覆特性的数值分析[J].计算机辅助工程,2011,20(1):42-46.