500m埋深综采工作面矿压规律与支架适应性分析

英文篇名：Analysis on the Adaptability of Stents and the Mine Pressure Regularity of 500 m Depth Fully Mechanized Working Face
中文刊名：现代矿业
英文刊名：Modern Mining
作者：王永明
英文作者：Wang Yongming ; Tiandi Science & Technology Co. ; Ltd.
中文关键词：综采工作面 ; 老顶 ; 矿压 ; 步距
英文关键词：Fully mechanized wording face ; Main roof ; Mine pressure ; Interval
出版日期：2014-07-20
机构：天地科技股份有限公司;
年：2014
期：07
出版单位：现代矿业

摘要

采用直读式压力表和数码连续记录压力计,监测埋深为500 m的综采工作面3个测区在回采过程中支架的载荷及顶板压力变化情况,研究了综采工作面采场整体矿压规律及支架的工作特征,得出埋深500 m的缓倾斜中厚煤层综采工作面老顶初次来压并不同步,机巷一侧的步距大于风巷一侧的结论。通过数据分析,所选择的支架和支护方式满足开采设计要求。
The direct reading type pressure gauge and digital continuous recording pressure gauge are adopted to monitor the support loading and the change situation of roof pressure in the process of mining of three measurement areas of the 500 m depth fully mechanized working face. Besides that,the stope pressure regularity and the wording characteristics of stents are researched,so the first weighting of main roof of the fully mechanized working face of 500 m depth slowly inclined thick coal seams are not synchronous,intervals on one side of the machine lane is greater than that of on side of the wind lane. The stents and supporting method in this paper can meet the requirements of mining design by analyzing the datas.

引文

[1]柴敬,高登彦,王国旺,等.厚基岩浅埋大采高加长工作面矿压规律研究[J].采矿与安全工程学报,2009,26(4):437-440.
    [2]宋选民,顾铁凤,闫志海.浅埋煤层大采高工作面长度增加对矿压显现的影响规律研究[J].岩石力学与工程学报,2007,26(S2):4007-4012.
    [3]黄庆享,钱鸣高,石平五.浅埋煤层采场老顶周期来压的结构分析[J].煤炭学报,1999,24(6):581-585.
    [4]孔令海,姜福兴,王存文,等.基于高精度微地震监测技术的特厚煤层综放面支架围岩关系研究[J].岩土工程学报,2010,32(3):401-407.
    [5]孔令海,姜福兴,王存文.特厚煤层综放采场支架合理工作阻力研究[J].岩石力学与工程学报,2010,29(11):2312-2318.
    [6]闫少宏.特厚煤层大采高综放开采支架外载的理论研究[J].煤炭学报,2009,34(5):590-593.
    [7]郝海金,吴健,张勇,等.大采高开采上位岩层平衡结构及其对采场矿压显现的影响[J].煤炭学报,2004,29(2):137-141.
    [8]弓培林,靳钟铭.大采高综采采场顶板控制力学模型研究[J].岩石力学与工程学报,2008,27(1):193-198.
    [9]胡国伟,靳钟铭.大采高综采工作面矿压观测及其显现规律研究[J].太原理工大学学报,2006,37(2):127-130.