脉冲涡流无损检测信号滤波方法研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
为了得到高信噪比、低失真度的涡流无损检测信号,以Matlab为仿真工具,对滑动窗口滤波法、频域滤波法、小波滤波法进行模拟仿真,对比滤波效果,确定小波阈值滤波为最终滤波方法,滤波参数为:Coif 3小波基、3层小波分解、启发式阈值,滤波后信号信噪比高、局部特征保留完整。
In order to obtain the eddy current nondestructive detection signals with high signal-noise ratio and low distortion, Matlab is used as a simulation tool to simulate the method of sliding-window filtering,frequency domain filtering method and wavelet filter method. Comparison of the filtering results is done with threshold filtering of wavelet. Filtering parameters are as follows:coif 3 small fundamental, three-layer wavelet decomposition, heursure and soft–threshold wavelet. Testing results indicate filtering results with high signal-noise ratio and low distortion.
引文
[1]Charles J,Hellier.无损检测评估手册[M].北京:中国石化出版社,2006:231-240.
    [2]段成功.基于脉冲涡流的管道检测方法研究[D].沈阳:沈阳工业大学,2013:43-47.
    [3]于英强.套管电磁探伤技术研究[D].西安:西安石油大学,2008:20-33.
    [4]张伟,师奕兵,王志刚,等.管道裂纹远场涡流检测的定量反演方法研究[J].仪器仪表学报,2013,34(8):1681-1690.
    [5]唐晓初.小波分析及其应用[M].重庆:重庆大学出版社,2006:115-130.
    [6]郑治真.小波变换及其MATLAB工具的应用[M].北京:地震出版社,2001:67-80.
    [7]潘泉,张磊,孟晋丽.小波滤波方法及应用[M].北京:清华大学出版社,2004:46-66.
    [8]刘明才.小波分析及其应用[M].北京:清华大学出版社,2013:20-60.
    [9]彭学文,付跃文.脉冲涡流检测信号的消噪处理[J].计算机工程与设计,2010,31(16):3715-3720.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心