基于LMS形态滤波和Hilbert变换的电能质量扰动定位
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
针对电能质量中常见的几种暂态扰动,为了实现对其正确地检测和定位,提出了一种最小均方(LMS)自适应形态滤波和Hilbert变换相结合的方法。首先,扰动信号中往往夹杂中各种噪声,采用基于LMS算法的广义形态学滤波器对扰动信号进行降噪处理。然后,对降噪后的信号进行Hilbert变换,提取扰动信号的幅值包络,可以实现对扰动的初步定位。最后,对提取的幅值包络进行后向差分处理,形成定位脉冲,实现对暂态扰动起止时刻和持续时间的精确定位。通过在不同条件下的仿真对比实验,证明了该方法的有效性。
For the common kinds of transient disturbance in power quality, in order to realize the detection and lo-cation correctly, this paper presents a method combining adaptive generalized morphological filter based on LMS(least mean square)and Hilbert transform. Firstly, the disturbance signals are mixed with all kinds of noise and thegeneralized morphological filter based on LMS is used to filter the noise. Then, it makes the signals with Hilberttransform and extracts amplitude envelope of the disturbance signals which can realize preliminary positioning ofthe disturbance. Finally, it makes amplitude envelope with the backward difference which forms the positioningpulse and realizes positioning the begin-end time accurately. The simulation experiments under different condi-tions have proved the effectiveness of the proposed method.
引文
[1]赵凤展,杨仁刚.基于短时傅里叶变换的电压暂降扰动检测[J].中国电机工程学报,2007,27(10):28-34.
    [2]尚婕,陈红卫,李彦.小波变换在电能质量暂态信号检测中的应用[J].继电器,2003,31(2):27-30.
    [3]占勇,程浩忠,丁屹峰,等.基于S变换的电能质量扰动支持向量机分类识别[J].中国电机工程学报,2005,24(4):51-56.
    [4]李天云,赵妍,李楠,等.基于HHT的电能质量检测新方法[J].中国电机工程学报,2005,25(17):52-56.
    [5]崔屹.图象处理与分析-数学形态学方法及应用[M].北京:科学出版社,2002:1-30.
    [6]岳蔚,刘沛.基于数学形态学消噪的电能质量扰动检测方法[J].电力系统自动化,2002,26(7):13-17.
    [7]宋平岗,周军,蔡双.基于形态学分形维数的输电线路故障选相方法[J].华东交通大学学报,2014,31(3):90-91.
    [8]陈平,李庆民.基于数学形态学的数字滤波器设计与分析[J].中国电机工程学报,2005,25(11):60-65.
    [9]张全明,刘会金.基于广义形态滤波的电力系统采样信号处理[J].电力自动化设备,2006,26(10):45-48.
    [10]刘盼,王静,刘涤尘.改进的自适应广义形态滤波器设计[J].电网技术,2009,33(2):94-98.
    [11]杨宏达.电压波动与闪变检测方法的研究[D].哈尔滨:哈尔滨理工大学,2010.
    [12]谢静.基于时间域加窗Hilbert变换的地震边缘检测研究[D].四川:成都理工大学,2007.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心