内置芯柱组合砌体受压承载力计算分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
提出了内置芯柱组合砌体,进行了受压性能试验,对比分析了内置芯柱对组合砌体受压性能的影响。基于试验,建立了内置芯柱组合砌体受压性能有限元分析模型,分析结果与试验符合较好。计算分析了钢管壁厚、混凝土强度对组合砌体受压性能的影响。研究表明:与普通砌体相比,内置芯柱组合砌体的受压承载力和延性明显提高;提高内置芯柱混凝土强度可提高试件的承载力,但延性略为降低;增加内置芯柱的钢管壁厚,可显著提高试件的承载能力,明显改善试件延性。
Composite masonry with built-in core columns was proposed in this paper. To study the difference in compression performance between the specimens with or without built-in core columns,the specimens were tested under axial compression load. The finite element modes of the specimens were built based on the tests,the analysis results of the modes are in good agreement with the test results. The finite element models with different concrete strength and steel tube wall thickness of the composite masonry with built-in core columns were built,the effect of the concrete strength and steel tube wall thickness on the compression performance of the composite masonry with built-in core columns were analyzed. Results show that compared with the ordinary masonry,the compression bearing capacity and ductility of the composite masonry with built-in core columns were increased significantly. Increase concrete strength of the built-in core columns can improve the bearing capacity of the specimen,but the ductility reduced slightly,increasing steel tube wall thickness of the built-in core columns,can significantly improve the bearing capacity of the specimen,can improve the ductility of specimens significantly.
引文
[1]魏书华.钢筋混凝土-砖组合砌体结构在抗震设防中的应用[J].华北地震科学,2006,24(3):44-46.Wei Shuhua.Application of ferroconcrete and brick combining structure in aseismic design[J].North China Earthquake Sciences,2006,24(3):44-46.(in Chinese)
    [2]宋扬,高均昭,赵军.ANSYS软件对组合砌体结构的受压模拟[J].山西建筑,2008,34(22):73-74.Song Yang,Gao Junzhao,Zhao Jun.Enduring stress simulation of ANSYS software to assembled building structure[J].Shanxi Architecture,2008,34(22):73-74.(in Chinese)
    [3]杨德健,张宗伟.混凝土空心砌块组合墙体抗震性能及影响因素分析[J].新型建筑材料,2010,37(3):42-44+47.Yang Dejian,Zhang Zongwei.Analysis on earthquake resistance and affective factors of concrete hollow block composite wall structures[J].New Building Materials,2010,37(3):42-44+47.(in Chinese)
    [4]宋扬.设置钢筋混凝土构造柱砖砌体的非线性有限元分析[D].贵阳:贵州大学,2006.Song Yang.Nonlinear finite element analysis on the brick masonry with reinforced constructional columns[D].Guiyang:Guizhou University,2006.(in Chinese)
    [5]张伟,余国英,程才渊.十字形截面配筋砌体墙片的非线性有限元抗剪分析[J].结构工程师,2009,25(1):21-25,40.Zhang Wei,Yu Guoying,Cheng Caiyuan.Nonlinear finite element analysis for shear resistance of crossshaped reinforced concrete masonry walls[J].Structural Engineers,2009,25(1):21-25,40.(in Chinese)
    [6]刘琛,刘洁平,张令心,等.钢筋网水泥砂浆面层加固砖砌体结构振动台模型设计[J].结构工程师,2012,28(6):72-78.Liu Chen,Liu Jieping,Zhang Lingxin,et al.Shaking table model design for brick masonry structures strengthened with an externally steel reinforced mesh mortar layer[J].Structural Engineers,2012,28(6):72-78.(in Chinese)
    [7]蔡贤辉,邬瑞锋,奚肖凤,等.组合砌体剪力墙的抗弯承载能力[J].建筑结构,1999,03:3-6.Cai Xianhui,Wu Ruifeng,Xi Xiaofeng,et al.The flexural bearing capacity of composite masonry shear wall[J].Building Structure,1999,03:3-6.(in Chinese)
    [8]刘富君,朱玉华,马晓辉.内构造柱加固砌体墙抗震性能有限元分析[J].结构工程师,2011,27(3):62-66.Liu Fujun,Zhu Yuhua,Ma Xiaohui,et al.Finite element analysis for seismic performances of unreinforced masonry walls strengthened with inside structural column[J].Structural Engineers,2011,27(3):62-66.(in Chinese)
    [9]刘岩,周中一,曹万林,等.内置芯柱保温夹层组合砖砌体受压性能试验研究[J].自然灾害学报,2015,24(2):141-151.LIU Yan,Zhou Zhongyi,Cao Wanlin,et al.Experimental research on compression behavior of brick masonry members of thermal-insulation sandwich and core columns inside[J].Journal of Natural Disasters,2015,24(2):141-151.(in Chinese)

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心