框架-BRB结构考虑弯曲型变形的抗侧刚度及设计参数
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
由于目前框架-BRB结构设计方法是基于结构层间位移全部由楼层剪切型变形造成,忽视了结构弯曲型变形的影响.为了准确计算防屈曲支撑提供的层间抗侧刚度,在现有层间剪切模型分析方法基础上,讨论结构弯曲型变形对框架-BRB结构影响规律.提出考虑结构弯曲变形下的层间抗侧刚度计算公式,并通过有限元方法验证.提出了抗侧刚度变化系数,考虑结构在弯曲型变形下BRB的相关设计参数的计算,抗侧刚度变化系数可应用在等效线性化设计方法中.
Traditional design method of FBRB( frame with buckling-restrained braces) which only considered inter-story shear deformation,ignoring flexural deformation of FBRB,did not conform to the deformation characteristic of FBRB. For accurately calculating the inter-story lateral stiffness,the authors presented formulas to calculate inter-story stiffness of BRB and the stiffness adjusting coefficient,considering flexural deformation and basing inter-story shear deformation model. Some design parameters of BRB were discussed under considering flexural deformation,and these parameters could be used in equivalent linearization method.
引文
[1]KIM Jinkoo,SEO Youngil.Seismic design of low-rise steel frames with buckling-restrained braces[J].Engineering Structures,2004,26:543-551.
    [2]何若全,卞若宁.框架-支撑钢结构在水平地震作用下的层间变形[J].苏州城建环保学院学报,2000,13(3):48-53.HE Ruo-quan,BIAN Ruo-ning.The stratified deformation of frame-supporting steel structure under the action of horizontal earthquake motion[J].Suzhou Institute of Urban Construction and Environmental Protection,2000,13(3):48-53.(in Chinese)
    [3]胡宝琳,李国强.水平荷载作用下框架-支撑结构层间位移简化算法[J].建筑结构,2011,41(8):72-74,123.HU Bao-lin,LI Guo-qiang.Simplified calculation method of interstorey displacement of braced frame structures under horizontal loads[J].Building Structure,2011,41(8):72-74,123.(in Chinese)
    [4]顾炉忠,高向宇,徐建伟,等.防屈曲支撑混凝土框架结构抗震性能试验研究[J].建筑结构学报,2011,32(7):101-111.GU Lu-zhong,GAO Xiang-yu,XU Jian-wei,et al.Research on seismic performance of BRB concrete frames[J].Journal of Building Structures,2011,32(7):101-111.(in Chinese)
    [5]高向宇,张腾龙,黄海涛,等.用防屈曲支撑改进钢框架-支撑结构抗震性能的设计方法[J].北京工业大学学报,2010,36(9):1206-1214.GAO Xiang-yu,ZHANG Teng-long,HUANG Hai-tao,et al.The design method for improving the aseismatic performance of concentrically braced steel frames with buckling-restrained brace[J].Journal of Beijing University of Technology,2010,36(9):1206-1214.(in Chinese)
    [6]李钢,李宏男.基于位移的消能减震结构抗震设计方法[J].工程力学,2007,24(9):88-94.LI Gang,LI Hong-nan.Direct displacement-based defign for buildings with passive energy dissipation devices[J].Engineering Mechanics,2007,24(9):88-94.(in Chinese)
    [7]高向宇,张慧,杜海燕,等.防屈曲支撑恢复力的特点及计算模型研究[J].工程力学,2011,28(6):19-28.GAO Xiang-yu,ZHANG Hui,DU Hai-yan,et al.Study on characterization and modeling of buckling-restrained brace[J].Engineering Mechanics,2011,28(6):19-28.(in Chinese)
    [8]高向宇,李永梅,张慧,等.考虑防屈曲支撑力学参数非对称性的有效阻尼比[J].建筑结构,2008,38(3):96-100.GAO Xiang-yu,LI Yong-mei,ZHANG Hui,et al.Study on effective damping ratio of buckling-restrained brace with asymmetrically mechanical properties[J].Building Structure,2008,38(3):96-100.(in Chinese)
    [9]刘云贺,张俊发,田洁,等.减震耗能系统等效线性化方法研究[J].西安理工大学学报,2000,16(1):74-79.LIU Yun-he,ZHANG Jun-fa,TIAN Jie,et al.The study of equivalent linear method of seismic reduction energy consumption system[J].Journal of Xi'an University of Technology,2000,16(1):74-79.(in Chinese)
    [10]李妍,吴斌,欧进萍.弹塑性结构等效线笥化方法的对比研究[J].工程抗震与加固改造,2002,27(1):1-6.LI Yan,WU Bin,OU Jin-ping.Comparison of equivalent linearization methods for inelastic structures[J].Earthquake Resistant Engineering and Retrofitting,2002,27(1):1-6.(in Chinese)
    [11]梁兴文,黄雅捷,杨其伟.钢筋混凝土框架结构基于位移的抗震设计方法研究[J].土木工程学报,2005,38(9):53-60.LIANG Xing-wen,HUANG Ya-jie,YANG Qi-wei.Displacement based seismic design method of RC frames[J].China Civil Engineering Journal,2005,38(9):53-60.(in Chinese)

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心