阻尼器用低屈服点钢BLY160的低周疲劳性能
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
对BLY160低屈服点钢低周疲劳性能进行了研究。采用轴向应变控制方法,在MTS809电液伺服疲劳试验机上开展低周疲劳试验,分别研究了在循环载荷作用下试验材料的循环应力响应特征、循环应力与应变的关系以及应变幅和应变速率对材料低周疲劳性能的影响。试验结果表明,BLY160钢具有良好的低周疲劳性能,完全满足耗能阻尼器用钢的需要。
Low cycle fatigue(LCF)properties of steel BLY160 with low yield point(LYP)was investigated.Low cycle fatigue tests were conducted on MTS809electro-hydraulic servo fatigue testing machine.The tests were run under uniaxial tension-compression loading with total strain control.The response characteristics of cyclic stress,the relationship between cyclic stress and strain and the effects of amplitude and rate of strain on low cycle fatigue properties of the test material were researched under cyclic loading.The results show that BLY160 steel plate has excellent low cycle properties to meet the requirement for the steels for energy dissipation damper.
引文
[1]Mitsuru Sugisawa,Hideji Nakamura,Yasushi Lchikawa,et al.Development of earthquake-resistant,vibration control,and base isolation technology for building structures[J].Nippon Steel Technical Report,1995,66:37.
    [2]周云,徐彤,俞公骅,等.耗能减震技术研究及应用的新进展[J].地震工程与工程振动,1999,19(2):122.
    [3]王毅恒,钟小兵,田北平,等.基于GIS的城市建筑防震减灾系统[J].四川理工学院学报:自然科学版,2013,26(2):86.
    [4]易朋莹,吕涛,吴韩.地震作用下地裂缝的形成机理研究[J].四川理工学院学报:自然科学版,2013 25(6):86.
    [5]王桂金,陆军生,吴宝榕.铁及铁基合金的阻尼性能[J].钢铁研究学报,1989,1(2):1.
    [6]温东辉,宋凤明,李陈,等.抗震用低屈服点钢低周疲劳性能[C]∥2009年第七届中国钢铁年会论文集.北京:冶金工业出版社,2009:337.
    [7]Chang Jui-tung,Wang Shyi-chin.The development of ultra low yield strength plate steel[J].China Steel Technical Report,1997(11):10.
    [8]宋凤明,温东辉,李自刚.抗震用极低屈服点钢组织和性能研究[J].材料热处理技术,2008,37(22):28.
    [9]温东辉,宋凤明,刘自成,等.建筑抗震用低屈服点钢的生产与应用[J].建筑钢结构进展,2009,11(5):16.
    [10]宋凤明,温东辉,李自刚.225 MPa级抗震用低屈服点钢的开发[J].材料热处理技术,2009,38(12):62.
    [11]宋凤明,温东辉,李自刚,等.低屈服点钢的发展及应用[J].热加工工艺,2008,37(6):85.
    [12]闵杰,盛光敏,吴结才,等.热轧H型钢的高应变低周疲劳性能研究[J].钢铁研究学报,2009,21(11):40.
    [13]罗云蓉,王清远,刘永杰,等.Q235,Q345钢结构材料的低周疲劳性能[J].四大学学报:工程科学版,2012,44(2):169.
    [14]Ye D,Saburo Matsuoka,Noburo Nagashima,et al.The lowcycle fatigue,deformation and final fracture behaviour of an austenitic stainless steel[J].Materials Science and Engineering,2006,415A(1/2):104.
    [15]Wu J H,Lin C K.Effect of strain rate on high-temperature low-cycle fatigue of 17-4PH stainless steels[J].Materials Science and Engineering,2005,390A(1/2):291.
    [16]王栓柱.金属疲劳[M].福建:福建科学技术出版社,1986.
    [17]詹苏宇,盛光敏,刘旭东,等.高强HRB400E建筑用抗震钢筋高应变低周疲劳性能研究[J].材料热处理技术,2010,39(16):22.
    [18]于强.循环蠕变加载下疲劳裂纹扩展速率的探讨[J].四川理工学院学报:自然科学版,2012,25(2):22.
    [19]于强.应力梯形波加载下的循环蠕变曲线函数[J].四川理工学院学报:自然科学版,2013,26(3):80.
    [20]于强.基于裂纹扩展的两级加载下的疲劳-蠕变寿命预测[J].四川理工学院学报:自然科学版,2014,27(4):24.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心