基于OpenSees的屈曲约束支撑混凝土框架静力弹塑性分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
目的为给出合理的抗震设计建议,研究不同参数的屈曲约束支撑混凝土框架结构的抗震性能.方法对一个四层三跨的混凝土框架结构进行静力弹塑性分析.建立模型过程中,同时考虑材料的非线性,构件的几何非线性.在此基础上,分析外围钢管的刚度、夹层混凝土的强度、内芯软钢的刚度对混凝土框架结构抗震性能的影响.结果屈曲约束支撑外围套管的厚度对其抗震性能有着较大的影响,建议采用厚度为5 mm的钢管.不同约束混凝土强度对屈曲约束支撑抗震的性能影响:层间位移角相差不到10%,属次要因素,混凝土采用C20即可.结论屈曲约束支撑混凝土框架结构具有良好的抗震性能,屈曲约束支撑外围刚度对框架结构的抗震性能影响最大,内部约束混凝土的强度对其影响不大.
To give reasonable seismic design suggestions,this paper studied the seismic performance of buckling-restrained brace( BRB) concrete frames with different parameters. Taking into account of geometric nonlinearity and material nonlinearity,a model for concrete frame structure of 4stories and 3 bays was built and analyzed. Based on this basis,influences of stiffness of the external steel tube,strength of the concrete and stiffness of the core steel on the seismic performance of BRB were obtained. It is found that the external steel tube thickness has significant influence on the seismic performance and steel tube with thickness 5 mm should be used. The story drift of restrained concrete frames is within 10%,that means the influence of restrained concrete strength is secondary. Using C20 concrete is appropriate. Conclusion is that concrete frame with BRB has goodseismic performance. The peripheral stiffness of BRB has significant effect on the seismic performance; but the influence of strength of internal restrained concrete is small.
引文
[1]陶湛湛,王社良.BRB在平面不规则钢框架中的应用研究[J].长春工程学院学报:自然科学版,2010,11(1):17-19.(Tao Zhanzhan,Wang Sheliang.Application research on BRB for irregular plane steel frame[J].Journal of Changchun College of Engineering:Natural Science,2010,11(1):17-19.)
    [2]李帼昌,林丹,高成福.静载下BRB与混凝土梁连接节点的有限元分析[J].沈阳建筑大学学报:自然科学版,2012,28(2):249-256.(Li Guochang,Lin Dan,Gao Chengfu.Finite element analysis of joints betw een BRB and concrete beams under monotonic loading[J].Journal of Shenyang Jianzhu University:Natural Science,2012,28(2):249-256.)
    [3]Chou C C,Chen P J.Compressive behavior of central gusset plate connections for a bucklingrestrained brace frame[J].Journal of Constructional Steel Research,2009,65:1138-1148.
    [4]Chen S J,Jhang C.Cyclic behavior of low yield point steel shear w alls[J].Thin-WalledStructure,2006,44(7):730-738.
    [5]赵俊贤,吴斌,梅洋,等.防屈曲支撑的研究现状及关键理论问题[J].防灾减灾工程学报,2010,9(10):93-100.(Zhao Junxian,Wu Bin,Mei Yang,et al.Existing situation of BRB research and key theoretical issues[J].Journal of Disaster Prevention and M itigation Engineering,2010,9(10):93-100.)
    [6]张维刚,杨飞颖,高晋栋.基于性能的BRB支撑框架的设计方法[J].甘肃科技,2007,23(5):155-157.(Zhang Weigang,Yang Feiying,Gao Jindong.A design method for BRB support framew ork based on its performence[J].Gansu Science and Technology,2007,23(5):155-157.)
    [7]Zhao J X,Wu B,Ou J P.A novel type of angle steel buckling-restrained brace[J].Earthquake Engineering and Structural Dynamics,2010,40(10):1083-1102.
    [8]唐代远,陆新征.汶川地震典型教学楼附加BRB支撑防倒塌加固效果分析[J].灾害学,2010,25(S):157-160.(Tang Daiyuan,Lu Xinzheng.Study on the effect of strengthening a typical RC frame in Wenchuan earthquake w ith BRB brace[J].Journal of Catastrophology,2010,25(S):157-160.)
    [9]Dall`Asta A,Ragni R,Zona A.A design method for steel frame equipped w ith buckling restrained braces[J].The 14th World Conference on Earthquake Engineering,2008,10:12-17.
    [10]Baghbanijawid Z,Yasrebinia Y.Seismic response of buckling restrained braced frames under near fault ground motions[J].Journal of Applied Sciences,2010,10(23):2967-2677.
    [11]李帼昌,张春雨.土木工程分析软件Open Sees的研究现状及最新进展[C].中国:中国钢结构协会,2011.(Li Guochang,Zhang Chunyu.Existing situation and latest development of Open Sees,the analysis softw are in field of civil engineering[C].China:China Steel Structure Association,2011.)
    [12]齐虎,孙景江,林淋.Open Sees中纤维模型的研究[J].世界地震工程,2007,23(4):48-54.(Qi Hu,Sun Jingjiang,Lin Lin.Research on fiber model of Open Sees[J].Word Earthquake Engineering,2007,23(4).48-54.)
    [13]Xia Chaoyi,Zhong Tieyi.Numerical analysis of the Nanjing Dashengguan Yangtze river bridge subjected to non-uniform seismic excitations[J].Journal of M echanical Science and Technology,2011,25:1297-1306.
    [14]刘丽娟.基于Open Sees的高强混凝土梁柱及框架的非线性有限元分析[D].合肥:合肥工业大学,2012.(Liu Lijuan,Nonlinear finite element analysis of high-strength concrete beam column and frame based on Open Sees[D].Hefei:Hefei University of Technology,2012.
    [15]胡大柱,李国强,孙飞飞,等.屈曲约束支撑铰接框架足尺模型模拟地震振动台试验[J].土木工程学报,2010,43(S):520-525.(Hu Dazhu,Li Guoqiang,Sun Feifei,et al.Full-scale shaking table tests on a hinge-connected steel frame w ith buckling restrained braces[J].China Civil Engineering Journal,2010,43(S):520-525.)
    [16]Wan-Shin Park,Hyun-Do Yun.Seismic performance of steel coupling beam-w all connections in panel shear failure[J].Journal of Constructional Steel Research,2006,62:1016-1025.
    [17]Dwairi H M,Kowalsky M J,Nau J M.Equivalent damping in support of direct displacement based design[J].Journal of Earthquake Engineering,2007,11(4):512-530.
    [18]Han Xiaolei,Chen Xuewei,Dai Jinhua,et al.Numerical analysis for low-cyclic loading test of shear w alls based on Open Sees[J].Huanan Ligong Daxue Xuebao:Natural Science,2008,12:7-12.
    [19]毛建猛.Pushover分析方法的改进研究[D].北京:中国地震局工程力学研究所,2008.(Mao Jianmeng.Improvements on push-over analysis procedure[D].Beijing:Institute of Engineering M echanic,China Earthquake Administration,2008.)
    [20]高向宇,张慧,杜海燕,等.防屈曲支撑恢复力的特点及计算模型研究[J].工程力学,2011,28(6):19-28.(Gao Xiangyu,Zhang Hui,Du Haiyan,et al.Study on characterization and modeling of buckling-restrained brace[J].Engineering M echanics,2011,28(6):19-28.)
    [21]赵俊贤,吴斌.防屈曲支撑的工作机理及稳定性设计方法[J].地震工程与工程振动,2009,29(3):131-139.(Zhao Junxian,Wu Bin.Working mechanism and stability design methods of buckling-restrained braces[J].Journal of Earthquake Engineering and Engineering Vibration,2009,29(3):131-139.)

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心