直线导轨-橡胶支座隔震装置及其在结构减隔震中的应用
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
由于橡胶隔震支座用于高柔结构时面临倾覆和不抗拉扭的问题,针对这个不利因素,提出了一种直线导轨-橡胶支座隔震装置。通过工程实例建立地震作用下的多自由度高柔结构与隔震装置的理论模型,并以此得到模型的动力方程,同时利用SAP 2000建立平面模型来验证理论模型。为了进一步验证直线导轨隔震系统的隔震效果,使用ABAQUS建立三维模型,与平面模型进行对比。理论和数值分析结果表明,隔震装置能够有效地降低结构的地震反应达70%~90%,同时克服橡胶支座用于高柔结构后易倾覆、不抗拉扭的缺点。该系统为高柔结构以后的隔震设计提供了设计参考。
Because of rubber bearing's problems of tension and overturning when using it for high-rise buildings,a new base isolation system has been produced. The paper described in detail the new base isolation system,and a theory model was set up according to a true project. The motion equation of system and structure under earthquake waves was established,then plane models were built up by SAP 2000 to verify the theoretical model; in order to verify the isolation effect of the system,a 3D model was also set up by using ABAQUS,which was compared with the plane model. The theoretical and numerical results show that the new base isolation system can reduce seismic responses of structure about 70%- 90%,and overcome disadvantages of rubber bearing's overturning and tension when it was used for high-rise buildings.
引文
[1]周锡元,闫维明,杨润林.建筑结构的隔震、减振和振动控制[J].建筑结构学报,2002,23(2):2-12.
    [2]苏键,温留汉·黑沙,周福霖.高层隔震建筑性能分析[J].建筑结构,2009,39(11):40-42.
    [3]周福霖.工程结构减震控制[M].北京:地震出版社,1997:29-38.
    [4]Skinner R I,Robinson W H,Mcvery G H.工程隔震概论[M].谢礼立,周雍年,赵兴权,等,译.北京:地震出版社,1996:12-30.
    [5]Chalhoub M S,Kelly J M.Sliders and Tension Controlled Reinforced Elastomeric Bearings Combined for Earthquake Isolation[J].Earthquake Engineering&Structural Dynamics,1990,27(1):41-53.
    [6]Ryota Maseki,Ichiro Nagashima,Masayoshi Hisano.An Experimental Study on Application of Hybrid-Type Base Isolation System to High-Rise Buildings[C]∥12th World Conference on Earthquake Engineering.Auckland:2000.
    [7]程华群,刘伟庆,王曙光.高层隔震建筑设计中隔震支座受拉问题分析[J].地震工程与工程振动,2007,27(4):161-166.
    [8]何永超,邓长根,曾康康.日本高层建筑基础隔震技术的开发和应用[J].工业建筑,2002,32(5):29-31.
    [9]日本免震构造协会[日].图解隔震结构入门[M].叶列平,译.北京:科学出版社,1998:3-10.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心