某空中咖啡厅连接体钢结构设计
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
根据工程的具体情况,经过对比试算,确定本工程的结构体系为钢梁(刚架)与两端裙楼滑动连接的低位弱连接方式;考虑相关规范的规定,确定了相应的计算原则;对结构整体建模进行分析设计,同时考虑罕遇地震作用,对梁端节点及支撑牛腿进行设计和验算。本设计各项参数均符合相关规范要求。
The slip connection is chosen between steel beam and annex according to the conditions of the project and the result of calculation.The design principle is given considering the regulations in correlative codes.The analysis of whole modeling is used in this paper.Based on the action of rare earthquake,checking computations are conducted in the end node of steel beam and supporting corbel.Each parameter accords with the requirement of the relevant codes.
引文
[1]雷宏刚,秦纪平.轻钢结构增层可行性及相关问题研究[J].太原理工大学学报,2003.32(4):331-334.
    [2]徐培福.复杂高层建筑结构设计[M].北京:中国建筑工业出版社,2005:314-357.
    [3]GB 50017-2003钢结构设计规范[S].
    [4]GB 50009-2001建筑结构荷载规范[S].
    [5]GB 50011-2001建筑抗震设计规范[S].
    [6]JGJ 3-2002高层建筑混凝土结构技术规程[S].
    [7]夏志斌,姚谏.钢结构设计方法与例题[M],北京:中国建筑工业出版社,2005.
    [8]王国周,瞿履谦.钢结构原理与设计[M].北京:清华大学出版社,2005.
    [9]陈绍蕃.钢结构设计原理[M].2版.北京:科学出版社, 2003.
    [10]CECS 102:2002门式刚架轻型房屋钢结构技术规程[S].
    [11]GB 50010-2002混凝土结构设计规范[S].
    [12]李星荣,魏才昂.钢结构连接节点设计手册[M].2版.北京:中国建筑工业出版社,2005.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心