基于DDS的KIS系统测试源设计
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
介绍采用高速微控制器,通过键盘及LCD人机界面控制DDS芯片AD9833产生相应频率的正弦波,为KIS地震监测仪表系统提供性能测试和响应测试信号,用于KIS系统现场测试,测试结果表明该方案具有较高精度和实用价值。
High speed micro-controller is adopted,and by using the keyboard and LCD user interface,DDS chip AD9833 is controlled to generate the sine wave meeting the frequency requirements.This design provides the signals of performance and response test for the KIS seismic instrumentation,and could be used for the on-site examination of KIS seismic instrumentation.The measurement results indicated that the scheme is of high accuracy and practical value.
引文
1 ANSI/ANS-2.2-2002,American national standard earth-quake instrumentation criteria for nuclear power plants[S].
    2 RG-1,12-1997.Nuclear power plant instrumentation forearthquakes[S].
    3 C8051F020/1/2/3 8K ISP flash MCUfamily[S].USA:Sil-icon Laboratories,2003.
    4 KTA2201.5(06196).Design of nuclear power plants againstseismic events[S].
    5+2.5V to+5.5V,25 MHz Low power CMOS completeDDS synthesize AD9833[S].Rev.B.USA:Analog De-vices,2003.
    6 Precision instrumentation amplifier INA114[S].USA:Tex-as Instruments,2000.
    7 Low-Offset voltage operational amplifiers OP07D[S].Rev.E.USA:Texas Instruments,2004.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心