基于强度折减的二维边坡稳定性方法研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
结合工程实例,采用有限元强度折减法对高陡边坡进行了静力及地震条件下的稳定性分析,探讨了该方法的计算原理、屈服准则,在求得地震边坡安全折减系数的基础上,对边坡的安全稳定性进行了评价,同时对这两种条件下所得的安全折减系数进行对比,计算结果表明,有限元强度折减法对于边坡稳定性分析是可行的。
Combined with the engineering example,the high steep slope stability is analysed under static and the earthquake conditions by the finite element strength reduction method and the method of calculating principle and yield criterion is discussed.The stability of slope is evaluated and the safety coefficient of the two conditions were compared in the obtained seismic slope safety factor.The results show that the finite element strength reduction method is available in earthquake stability analysis of slope.
引文
[1]赵尚毅,郑颖人,时卫民.用有限元强度折减法求边坡稳定安全系数[J].岩土工程学报,2002,24(3):343-346.
    [2]戴妙林,李同春.基于降强法数值计算的复杂岩质边坡动力稳定性安全评价[J].岩石力学与工程学报,2007,26(S1):2749-2754.
    [3]刘立平,雷尊宇,周富春.地震边坡稳定分析方法综述[J].重庆交通学院学报,2001,20(3):83-88.
    [4]连镇营,韩国城,孔宪京.强度折减有限元法研究开挖边坡的稳定性[J].岩土工程学报,2001,23(4):406-411.
    [5]郑颖人,陈祖煜,王恭先,等.边坡与滑坡工程治理[M].北京:人民交通出版社,2007.
    [6]万林海,金海元,吴伟功,等.有限元强度折减法的应用分析[J].人民黄河,2005,27(9):43-47.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心