双磁路伺服式低频角振动台
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
给出了一种双磁路伺服式低频角振动台的结构原理,导出了角振动台的微分方程、频率特性、以及灵敏度计算公式。在国家级计量部门对角振动台的频率特性、灵敏度、波形失真度等进行了校准,在实验室内对角振动台的线性度、稳定性等技术指标进行了测试。测试结果表明,双磁路伺服式低频角振动台具有良好的性能,计算结果和测试结果吻合。可用于强震转动加速度计及其他转动传感器的校准和检测。
Based on the structural principle of a double magnetic circuit servo low frequency angular vibration table,several technical indexes were derived,such as its formula of differential equation,frequency characteristics and sensitivity. Some technical indexes of the angular vibration table were calibrated in the National Calibration Department,such as the frequency characteristics,sensitivity and waveform distortion. The others were measured in the laboratory,such as the linearity and stability. According to the results,it can be shown that the double magnetic circuit servo low frequency angular vibration table has a good performance. The calculation conforms to the test.It can be used for the rotation sensors calibration,especially for the strong motion rotational accelerometers.
引文
[1]李宏男,孙立晔.地震面波产生的地震动转动分量研究[J].地震工程与工程振动,2001,21(1):15-23.LI Hongnan,SUN Liye.Rotational components of earthquake ground motions derived from surface waves[J].Earthquake Engineering and Engineering Dynamics,2001,21(1):15-23.(in Chinese)
    [2]何超,罗奇峰,洪钟.关于地震动转动分量的研究[J].地震研究,2011,34(1):81-87.HE Chao,LUO Qifeng,HONG zhong.Brief discussion on the study of the seismic rotational components[J].Journal of Seismological Research,2011,34(1):81-87.(in Chinese)
    [3]Robert L,Nigbor.Six-degree-of-freedom ground-motion measurement[J].Bull.Se ism.Soc.Amer,1994,84(5):1665.
    [4]蔡乃成,付子忠.旋转地震仪的研制[J].地震学报,2009,31(3):347-352.CAI Naicheng,FU Zizhong.Manufacture of rotation seismograph[J].Acta Seismologica Sinica,2009,31(3):347-352.(in Chinese)
    [5]黄振平,王绍荣.关于强震观测中利用回转摆测量转动分量的讨论[J].地震工程与工程振动,2004,24(5):167-170.HUANG Zhenping,WANG Shaorong.A discussion on rotational pick-up[J].Earthquake Engineering and Engineering Dynamics,2004,24(5):167-170.(in Chinese)
    [6]中国地震局工程力学研究所,杨学山.一种地震转动加速度计[P],中国实用新型专利,CN 203054236 U.YANG Xueshan.Earthquake rotational accelerometer[P].CN 203054236 U.(in Chinese)
    [7]杨振宇,卢海燕,蔡莉,等.六自由度地震动测量方法及其误差分析[J].世界地震工程,23(4):2007.YANG Zhenyu,LU Haiyan,CAI Li,et al.Six-degree-freedom ground motion measurement method and its errors analy sis[J].World Earthquake Engineering,2007,23(4):84-87.(in Chinese)
    [8]彭军,何群,薛景锋,等.低频标准角振动台[J].测量与校准,2005,25(6):46-48.PENG Jun,HE Qun,XUE Jingfeng,et al.Low frequency standard angular exciter[J].Measurement and Calibration,2005,25(6):46-48.(in Chinese)
    [9]ISO 16063-15:2006 Methods for the calibration of vibration and shock transducers—Part 15:Primary angular vibration calibration by laser interferometry.
    [10]GB/T 20485.15-2010振动与冲击传感器的校准方法第15部分:激光干涉法角振动绝对校准[S].GB/T 20485.15-2010 Methods for the calibration of vibration and shock transducers-Part 15:Primary angular vibration calibration by laser interferometry[S].(in Chinese)
    [11]GJB/J6205-2008角振动传感器校准规范[S].GJB/J6205-2008 Calibration Specification for Angular-Position Transducers/Sensors[S].(in Chinese)
    [12]杨学山.工程振动测量仪器和测试技术[M].北京:中国计量出版社,2001.YANG Xueshan.Engineering vibration measurement instrument and measurement technology[M].Beijing:China Metrology Press,2001.(in Chinese)
    [13]杨学山.加速度计频率特性扩展技术研究[J].振动与冲击,2010,29(4):81-84.YANG Xueshan.Accelerometer frequency response extending technology research[J].Journal of Vibrati on and Shock,2010,29(4):81-84.(in Chinese)

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心