匀质化方法在砌体结构地震反应分析中的应用
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
利用匀质化方法,得到一个三层砌体结构等效体积单元的各力学参数,再运用ANSYS软件对该砌体结构进行了地震反应模拟。最后把计算结果与试验结果进行了对比,二者基本吻合,说明采用砌体匀质化方法进行非线性分析是合理可行的。
Masonry is not a homogeneous material.It is difficult to simulate the performance of this material.All parameters of representative volume element of a three-story masonry structure by homogenization method are got,then earthquake is simulated on this masonry structure via ANSYS.Finally,results of experiment with results of simulation are compared,and the two results are indentical.It is proved that the homogenization method is reasonable to analyze masonry.
引文
[1]李锡军.预应力砖房模型抗震性能试验研究[D].重庆:重庆大学土木工程学院,2000.
    [2]GUOWEI MA,HONG HAO,MEMBER,ASCE,YONG LU.Homogenization of masonry using numerial simulations[J].ASCE Journalof Engineering Mechanics,2001,127(5):421-431.
    [3]刘振宇,叶燎原,潘文.等效体积单元(RVE)在砌体有限元分析中的应用[J].工程力学,2003,20(2).
    [4]王达诠,武建华.砌体RVE均质过程的有限元分析[J].重庆建筑大学学报,2002,24(4).
    [5]MICHAEL W TANTALA.Development of seismic fragility curves for tallbuildings[C]//15th ASCE Engineering Mechanics Conferences,2002.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心