基于Occam反演算法的微地震速度模型反演
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
为了能够对微地震震源进行精确定位,需要已知压裂井和监测井所在工区内准确的地层速度模型。针对这一问题,在采用Occam反演算法的基础上,提出一种利用初至波的走时差信息代替旅行时进行速度模型反演的方法。利用该方法,可以在无须已知射孔起始时间的情况下反演得到地层速度模型。通过模型数据的处理以及对结果的分析,表明虽然受到初至到时拾取误差的影响,采用上述方法反演得到的速度模型会存在一定的误差,但利用该模型可以将射孔位置定位到其真实位置附近,表明该速度模型可用于进行微地震震源定位。
In order to accurately locate the microseism sources, a thorough knowledge of the velocity model between the treatment well and monitoring well is essential. A new method is developed to invert the velocity model based on Occam inversion algorithm. Instead of the travel times, this method adopts the moveouts of the first arrivals to invert the velocity models, so it can overcome the limitation of conventional approaches when the perforation origin times are unavailable or measured inaccurately. The feasibility of this method is examined on synthetic datasets. The results demonstrate that although the velocity models obtained using this method show some discrepancies, which are caused by the picking errors, they can locate the perforation shots back to their expected positions, so the inverted velocity models can be used to locate the microseism sources.
引文
[1]Warpinski N R,Sullivan R B,Uhl J E,et al.Improved microseismic fracture mapping using perforation timing measurements for velocity calibration//SPE Annual Technical Conference and Exhibition.Denver,2003:84488
    [2]Warpinski N R,Sullivan R B,Uhl J E,et al.Improved microseismic fracture mapping using perforation timing measurements for velocity calibration.SPE Journal,2005,10(1):14-23
    [3]Pei D H,Quirein J A,Cornish B E,et al.Velocity calibration using microseismic hydraulic fracturing perforation and string shot data//SPWLA 49th Annual Logging Symposium.Austin,2008:2008-H
    [4]Pei D H,Quirein J A,Cornish B E,et al.Velocity calibration for microseismic monitoring:a very fast simulated annealing(VFSA)approach for jointobjective optimization.Geophysics,2009,74(6):WCB47-WCB55
    [5]Pei D H,Quirein J A,Cornish B E,et al.Velocity calibration for microseismic monitoring:a very fast simulated annealing approach//CPS/SEG 2009International Geophysical Conference and Exposition.Beijing,2009:165-168
    [6]Bardainne T,Gaucher E.Non-linear calibration of complex velocity models in microseismic jobs//EAGE Workshop on Passive Seismic.Limassol,2009:A03
    [7]Bardainne T,Gaucher E.Constrained tomography of realistic velocity models in microseismic monitoringusing calibration shots.Geophysical Prospecting,2010,58(5):739-753
    [8]Constable S C,Parker R L,Constable C G.Occam’s inversion:a practical algorithm for generating smooth models from electromagnetic sounding data.Geophysics,1987,52(3):289-300
    [9]de Groot-Hedlin C,Constable S.Occam’s inversion to generate smooth,two-dimensional models from magneto-telluric data.Geophysics,1990,55(12):1613-1624
    [10]La Brecque D J,Miletto M,Daily W,et al.The effects of noise on Occam’s inversion of resistivity tomography data.Geophysics,1996,61(2):538-548
    [11]Vallée M A,Smith R S.Application of Occam’s inversion to airborne time-domain electromagnetics.The Leading Edge,2009,28(3):284-287
    [12]Dimri V P,Vedanti N,Srivastava R P.An efficient and accurate algorithm for non-linear inversion of geoeletric data following Occam’s inversion scheme//SEG 73rd Annual International Meeting.Dallas,2003:534-536
    [13]Hobbs B,Linfoot J.Variations of 1D Occam inversions applied to multi-transient electromagnetic data//SEG 77th Annual International Meeting.San Antonio,2007:516-520
    [14]吴小平,徐果明.大地电磁数据的Occam反演改进.地球物理学报,1998,41(4):547-554
    [15]何梅兴,胡祥云,叶益信,等.2.5维可控源音频大地电磁法Occam反演理论及应用.地球物理学进展,2011,26(6):2163-2170
    [16]何梅兴.可控源音频大地电磁二维Occam反演研究[D].武汉:中国地质大学,2009
    [17]刘羽,王家映,孟永良.基于PC机群的大地电磁Occam反演并行计算研究.石油物探,2006,45(3):311-315
    [18]周道卿,谭捍东,王卫平.频率域航空电磁资料Occam反演研究.物探与化探,2006,30(2):162-165
    [19]翁爱华.Occam反演及其在瞬变电磁测深中的应用.地质与勘探,2007,42(5):74-76

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心