一种高精度地震勘探数据采集系统的设计与实现
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
在现代地震勘探中,可以通过采集人工地震波所携带的地下信息来分析地层结构从而寻找油、气等资源;由于地震勘探信号的动态范围很大,采用具有高动态范围的24位∑-ΔA/D CS5321/CS5322组件完成高精度数据采集,结合FPGA、FIFO存储器和嵌入式计算机模块DIMM-PC构成三通道并行数据采集系统,用于地震勘探数据采集,并给出了该系统的设计方法和测试结果,结果表明电路工作正确可靠,满足地震检测对系统总的动态范围的要求。
In the modern seismographs,people can get the distribution of the stratigraphic structure by analyzing the seismic data carried by the artificial seismic wave to prospect oil-gas resource.For the high dynamic range of the seismic signal,a kind of high precision three- channel parallel seismic data acquisition system was mainly made up by 24-bitΣ-△Variable Bandwidth A/D Converter Chipset CS5321/ 22,FPGA,FIFO and DIMM-PC.The design method and test result of the system are given.The results of simulation on the hardware circuit proved this design efficient and can meet the whole dynamic range requirements for the Seismic Acquisition System very well.
引文
[1]刘益成.地震信号的时-频特性与瞬时动态范围[J].石油物探,1996,35(1):66-70.
    [2]刘益成,罗维炳.信号处理与过抽样转换器(第一版)[M].北京:电子工业出版社,1997.
    [3]黄灿杰,毛凯.基于FPGA的PXI数据采集系统设计[J].计算机测量与控制,2006,14(1):123-130.
    [4]24-bit Variable Bandwidth A/D Converter Chipset CS5321/22. Crystal,USA,1999.
    [5]邓明,邓靖武,等.四阶Δ∑过抽样电路原理及其在微弱地学信号检测中的应用[J].地学前缘,2002,9(4):417-421.
    [6]杨振宇,高峰等.强震观测系统中数字抽取滤波器的实现研究[J].传感器技术,2005,24(8):28-33.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心