摘要
地震时,楼梯是重要的逃生通道。但关于地震作用下楼梯与框架共同工作方面的研究还很少,文章采用结构有限元软件Midas/Gen,对一个6层钢筋混凝土现浇板式楼梯框架办公楼模型进行分析,对模型在地震作用下的受力情况进行了详细研究,与传统楼梯设计方法(楼梯间结构不考虑地震作用,结构处楼梯间开洞)结构地震反应做对比。结果表明:考虑楼梯参与结构整体计算会增加结构的抗侧刚度,且结构扭转效益增大,总体对结构不利。
The researches on performance of frames with stairs under earthquake are scarce.In this paper,an analysis of a six-floor reinforced concrete frame structure with cranked slab stairs was carried out using the finite element software Midas/Gen for model structure.Compare with the traditional design method of stairs(staircase structure is not considered earthquake,the structure at the stairwell openings) seismic response.The results showed that:the whole structure into account in calculating the stairs will increase the lateral stiffness of the structure,increase efficiency and torsion,the overall structural disadvantage.
引文
[1]姚谦峰,苏三庆.地震工程[M].西安:陕西科学技术出版社,2000.
[2]徐有邻.汶川地震震害调查及对建筑结构安全的反思[M].北京:中国建筑工业出版社,2009.
[3]杨俊,黄维.地震过程中楼梯震害分析及对设计的建议[J].低温建筑技术,2010,32(11):44-45.
[4]地震作用下楼梯参与结构空间整体计算的研究[J]福建建设科技,2010(04):38-40.
[5]张竹庭,高吉龙.地震作用下楼梯构件刚度对框架结构的影响分析[J].江苏建筑,2010(4):33-35.
[6]沈靓,张瑜中,吴季柏,柳炳康.框架楼梯参与结构抗侧体系工作的有限元分析[J].工程与建设,2010(1):77-79.
[7]孙喜晶.框架结构楼梯间的抗震设计初步研究[D].西南交通大学,2010.