基于光纤光栅地震检波解调系统的微弱信号检测电路设计
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
研究了并设计了应用于光纤光栅地震勘探系统的光电检测电路。宽带光源经光纤光栅传感器反射回来的布拉格信号波很微弱,这就对微弱信号的检测提出了一个很大的难题,也影响着整个地震勘探解调系统的检测精度。在对一般电路设计的思路基础上,研究和设计了可探测微弱信号的光电转换电路。经过实验证明,此电路的噪声仅为0.19 mV,从而提高了系统的解调精度和速度。
A photoelectric detection circuit used in fiber Bragg grating(FBG) seismic surveying system is re searched and designed. The Bragg signal wave reflected by a fiber grating reflector from a broadband light source is very weak. So the detection of weak signal is very difficult and the detection accuracy of the entire seismic de modulation system is also influenced. Based on the general circuit design idea, a photoelectric conversion circuit detecting weak signals is researched and designed. Experimental results show that the noise in the circuit is only0.19 mv. So the demodulation accuracy and speed of the system are improved.
引文
[1]Morey W W,Meltz G,Glenn W H.Fiber optic Bragg gratingsensors[J].Proc.SPIE,1990,1169:98-107.
    [2]Ball D A,Morey W W.Standing-wave monomode erbium fiber laser.Photon.Technol.Lett.,1991,3(7):613-615.
    [3]乔学光,丁锋,贾振安,等.基于光源滤波的高精度光纤光栅地震检波解调系统[J].光学学报,2010,30(8):2219-2223.
    [4]丁锋,李翠翠,乔学光,等.基于边缘滤波解调的光纤光栅低频地震检波器[J].光电子技术,2010,30(4):261-264.
    [5]乔学光,丁锋,贾振安,等.高精度准分布式光纤光栅地震检波解调系统的研究[J].物理学报,2011,60(7):0742211-6.
    [6]丁锋,王粉艳,王云建,等.一种光纤光栅振动与温度同时区分测量的解调方法[J].传感技术学报2011,25(4):510-514.
    [7]GONG Han,CHEN Hao-yu.The design and realization ofan optic-electric detecting circuit for weak signal[J].Science&Technology Information,2007,27:85-87.
    [8]HE Jin,LIU Tie-gen,MENG Zhuo,et al.Design of prime aamplification circuit of photoelectric detection system for feeble signal[J].Science Technology and Engineering,2007,7(9):1904-1907.
    [9]SUN Hong-bin,MO Yong-xin.Design of amplifier circuit ofphoto-electric detection for weak signal[J].Modern Electronics Technique,2007,18:156-158.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心