大型非锚固储液罐水平地震响应数值分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
基于ANSYS14.0软件建立了3万m3大型非锚固储液罐流固耦合有限元模型,并进行了抗震设计等级下水平地震作用应力和位移响应的数值分析。分析表明:在水平地震作用下,罐壁靠近底部区域出现了明显的"象足"变形;应力与应变响应的结果显示,发生"象足"变形的区域等效应力小于屈服强度,而轴向压应力超过规范设计临界应力,说明"象足"变形为局部屈曲破坏;对于大体积非锚固储液罐,水平地震作用下相对于小体积储罐底板竖向提离的位移较小。
A finite element model of a thirty thousand cubic meter large unanchored storage tank considering fluid solid coupling theory based on ANSYS14.0 software and numerical analysis of stress and deformation response was investigated under horizontal ground motion according to seismic design level.The results indicate that under horizontal ground motion,elephant foot deformation occurs near the bottom of the tank's wall and in elephant foot deformation region,equivalent stress is smaller than material yield stress.However,the axial compress stress in such region exceeds the critical stress in design code.As a result,it indicates that elephant foot deformation belongs to local buckling failure.For large volume unanchored storage tanks,vertical uplifting deformation of bottom plane is small compared with small volume tanks.
引文
[1]林均岐,李山有,李谊瑞,等.立式储液罐地震反应数值分析[J].地震工程与工程振动,2006,26(4):152-155.
    [2]范喜哲,郑天心,王伟,等.地震作用下立式储液罐罐壁“象足”变形仿真分析[J].地震工程与工程振动,2007,27(3):104-109.
    [3]李文刚,金玉姬,高锐.水平地震激励下储罐液体晃动分析[J].自然灾害学报,2007,16(2):138-142.
    [4]孙建刚,宫克勤,齐含兵,等.水平地震作用下无锚固储罐应力与应变响应分析[J].地震工程与工程振动,2007,27(5):110-115.
    [5]周利剑.储罐底板提离试验及数值模拟分析[J].工程抗震与加固改造,2010,32(3):90-93.
    [6]周建伟,方秦,张亚栋.地下储液罐抗爆炸地冲击作用的流固耦合有限元分析[J].防灾减灾工程学报,2009,29(1):35-42.
    [7]Ozdemir Z,Souli M,Fahjan Y M.Application of Nonlinear Fluid-structure Interaction Methods to Seismic Analysis ofAnchored and Unanchored Tanks[J].Engineering Structures,2010,32(2):409-423.
    [8]Alemdar Bayraktar,Baris Sevim,Ahmet Can Altunisk,et al.Effect of the Model Updating on the Earthquake Behavior ofSteel Storage Tanks[J].Journal of Constructional Steel Research,2013,66(3):462-469.
    [9]Estekanchi H E,Alembagheri M.Seismic Analysis of Steel Liquid Storage Tanks by Endurance Time Method[J].Thin-walled Structures,2013,50(1):14-23.
    [10]王岩.地震力作用下钢制充液储罐动力仿真分析[J].低温建筑技术,2013,35(3):83-84.
    [11]方舟,陈志平,晏顺娟,等.2800mm非锚固金属储液罐大型地震模拟实验[J].压力容器,2012,29(6):1-8,53.
    [12]李敏,张霖,李洪明.地震激励下的储罐动压力理论分析[J].化工机械,2013,40(2):149-152.
    [13]顾璐寅.储液容器的动特性和动力响应分析[D].重庆:重庆大学,2012.
    [14]American Petroleum Institute.API-650 Welded Steel Tanks for Oil Storage[S].Washington,DC:American PolymersInc,2009.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心