考虑地震载荷作用的水电机组转动部件强度分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
近年地震多发,震中地区的水电机组均受到不同程度的损坏。为研究地震后机组运行的可靠性,根据恢复运行后其运行条件和方式较灾前变化情况,把承受转动部件的上机架纳入分析对象,对应不同工况在上机架上采用应变片测试来验证计算分析的正确性。为了准确计算转动部件承受的载荷,采用CFD对水轮机内部流场进行三维数值模拟,将流场的计算结果作为结构场的初始条件。以地震力和地震加速度两种方式加载地震载荷,采用单向流固耦合方法对各部件进行地震载荷下的仿真计算与工程实测数据对比发现二者吻合较好。结果表明,文章采用的方法能正确评估水轮机结构强度,对机组灾后运行安全性分析有一定指导作用。
In recent years,hydropower projects in the epicenter areas are subject to different degrees of damage from the frequent earthquake.To study the operating stability of hydro-power generating units after the earthquake,this paper calculates the hydrogenerating set suffering from partial centered stress,according to the resumed operating conditions and changes brought by the earthquake.Based on CFD capacity forecasting,by using RNG k-e model and SIMPLE arithmetic,this paper simulates the inner hydraulic turbine flow field in three-dimensional numerical simulation and uses the simulation as the initial conditions for constructive field.Loads brought by the earthquake are calculated by seismic forces and seismic accelerations and uses the one-way fluid-structure interaction simulation to complete the simulation of working of components under seismic loads.Compared with engineering tests,the simulation has a relative agreement.The results show that this method can correctly calculate the turbine structural strength,providing guidance for the safety operation to the units in consequential period and good for the further structural optimization.It also serves as a reference for the reconstruction work of power plants and has a practical engineering significance.
引文
[1]王海军,练继建.混流式水轮机轴向动荷载识别[J].振动与冲击,2007,(4):123-125,174.
    [2]郑源,鞠小明,程云山.水轮机[M].北京:中国水利水电出版社,2007.
    [3]唐澍,潘罗平.大型混流式水轮机的应用现状与技术发展[J].水利水电技术,2009,(8):108-112.
    [4]荆丰梅,肖钢,熊志民.潮流能水轮机单向流固耦合计算方法[J].振动与冲击,2013,(8):91-95,104.
    [5]肖若富,王正伟,罗永要,等.基于流固耦合的混流式水轮机转轮静应力特性分析[J].水力发电学报,2007,26(3):120-123,133.
    [6]孙佳,许京荆,翁健.基于ANSYS Workbench高压电阻箱式结构的抗震分析[J].机械设计,2012,(2):72-75.
    [7]宋学官,蔡林,张华.ANSYS流固耦合分析与工程实例[M].北京:中国水利水电出版社,2012.
    [8]CN-GB,中国地震动参数区划图[Z].2001.
    [9]刘海军,赵建军,祝正南,等.考虑地震力作用方向的危岩稳定性研究[J].三峡大学学报(自然科学版),2014,36(3):61-65.
    [10]梁尚明,闫喜江,莫春华,等.静载荷与地震载荷作用下ITER重力支撑系统有限元静力分析[J].核科学与工程,2010,30(2):150-154.
    [11]刘德有,游光华,王丰,等.混流可逆式水轮机转轮轴向水推力计算分析[J].河海大学学报,2004,(5).

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心