应用随机模拟技术建立夹层模型
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
针对块状底水油藏的储层具有非均质性较为严重 ,夹层分布变化大 ,采用传统地质建模方法难以描述夹层大小及延伸长度 ,因而不能很好反映储层非均质性的实际情况 ,建立了先用随机模拟方法建立夹层预测模型 ,再利用此模型对储层属性模型进行校正而建立储层属性模型的“二步建模”方法 ,从而解决了传统建模方法中存在的问题 ,使得油藏模拟研究变得快捷和准确。该方法的实质是既利用了钻井资料的高分辨率 ;又充分利用了地震资料的高覆盖性。平湖油田H2油藏花港组储层为三角洲水下分流河道砂体 ,泥质夹层很发育。用传统的“一步建模法” ,历史拟合需做 10次以上的参数调整 ,经 15天以上方能完成 ,效果还不理想 ;采用“二步建模”法 ,历史拟合仅需 5~ 6次参数修改 ,3~ 4天拟合就可完成。计算结果与实际生产结果吻合程度很高
Pinghu oil gas field in East China Sea is a massive,bottom water drive light crude oil pool.The reservoir heterogeneity is relatively serious,and the distribution of muddy interlayers is a big variety.It is difficult to describe the size of muddy interlayers by traditional geologic model building method.It takes about 15 days and more than 10 times modifying the parameters of history fitting and reservoir simulation on H2 resevoir,because the geological model by traditional method can not describe clearly the reservoir heterogeneity,and the result of history fitting is not good.Use stochastic simulation to built prediction model,then,3 D reservoir attribute model is revised by the prediction model.It only takes 3~4 days and 5~6 times modifying the parameters of the history fitting and reservoir simulation.The result is very good and exact.
引文
1 吕晓光,王德发,姜洪福储层地质模型与随机建模技术[J]大庆石油地质与开发,2000,19(1):10~13
    2 吴胜和,熊琦华油气储层地质学[M]北京:石油工业出版社,1998
    3 侯景儒,郭光裕矿床统计预测及地质统计学的理论与应用[M]北京:冶金工业出版社,1993
    4 裘怿楠,薛叔浩油气储层评价技术[M]北京:石油工业出版社,1994

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心