基于共反射点叠加的观测参数选择
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
在地震勘探数据处理中,通常采用的共中心点(CMP)叠加技术对于复杂的地质构造难以取得好的效果。若通过从道间距、覆盖次数等观测参数与目标层地层倾角、共反射点离散度的关系出发,并结合模型正演,对复杂构造地层的观测参数选取进行优化,使之能对目标层尤其是逆断层下降盘的阴影层段进行较充分的"照明",即可得到共反射点叠加剖面,这对共反射点叠加是一项有益的研究。
As the common mid-point (CMP) stacking is hard to get a good effect in the complicated geological structure in seismic data processing, the common reflection point(CRP) stacking is used. Analyzing the relation of the steep dip, dispersion of common reflection point and parameters of reception arrangement such as trace interval ,fold number etc., the parameters of reception arrangement are optimized with the forward modeling. Finally the CRP stacking sections are achieved, which is potential for the research of common reflection point stacking.
引文
[1] CruzJCR,HubralP,TygelMetal.Thecommonreflectingelement(CRE)methodrevisited[J].Geophysics,2000,65(3):979.
    [2] CervenyV,MolotkovIA,PsencikI.刘福田,胡戈,吴华,等译.地震学中的射线方法[M].北京:地质出版社,1986.
    [3] 何樵登.地震勘探原理和方法[M].北京:地质出版社,1986.
    [4] 贺振华,黄德济.复杂油气藏地震波场特征方法理论及应用[M].成都:四川科学技术出版社,1999.
    [5] 朱介寿.地震学中的射线方法[M].北京:地震出版社,1988.
    [6] 张国森.共反射点时距曲线和变速DNO[J].石油地球物理勘探,1997,32(2):195.
    [7] 韩立国,孙建国,何樵登,等.共反射面与共中心点联合叠加成像[J].石油物探,2003,42(1):25.
    [8] 李振春,姚云霞,马在田,等.基于参数多级优化的共反射面叠加方法及其应用[J].石油地球物理勘探,2003,38(2):156.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心