时频联合分析地震计正弦标定数据
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
介绍短时傅里叶变换,分析地震计正弦标定信号的特点,提出基于时间域和频率域联合分析正弦标定波形组起始点的方法,可以准确找出每组正弦标定信号的频率和振幅,计算地震计的速度响应灵敏度。
In this article,the authors describe the short-time Fourier transform.Introduce the characteristics of the sine calibration signal of seismometer in time domain and frequency domain,propose an algorithm for identifying the starting and ending points in calibration data base on the joint of time-domain and frequency domain first time.Using this algorithm,we can accurately identify each sine calibration signal frequency and amplitude,and then calculate the velocity response sensitivity of seismometer.
引文
林湛,朱小毅,薛兵,等.正弦标定自动处理算法研究[J].地震,2008,28(2):93-96.
    邵玉平,韩进.正弦标定波形组起始点的自动判别方法[J].地震地磁观测与研究,2008,29(2):90-93.
    唐向宏,李齐良.时频分析与小波变换[M].北京:科学出版社,2008;45-46.
    [美]L.科恩著,自居宪译.时-频分析理论与应用[M].西安交通大学出版社,1998:1-2.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心