基于SOPC技术的地球物理模拟可控震源研制
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
选用基于SOPC内核的专用芯片设计了地震物理模拟可控震源硬件平台;设计中,编写了基于Avalon总线接口与寄存器接口文件,应用SOPC Builder完成D/A模块的IP核设计以及系统外设IP核的配置工作,完成了可控震源硬件平台间各个功能模块的逻辑与时序接口控制;从实际测试结果来看,达到了设计的预期目的;该方案的优点在于通过SOPC技术来完成软硬件设计,系统集成度高,硬件平台可移植性好;经过实际应用,满足工程实际需要。
Based on the research of SOPC architecture,A SOPC chip is exploited to produce a controlled geophysical model Signal Generator.In the paper interface timing logics about the system is designed on SOPC kernel.Application of system IP and IP core self-completed by SOPC Builder accomplished the design about high speed D/A and the extension of system external instruments.From the test result in practice,it proves the design have achieved the expected objectives.The advantage of the design lies in simplicity and high integration.
引文
[1]牟永光.地震勘探资料数字处理方法[M].北京:石油工业出版社,1981.
    [2]曹旭东,狄帮让,许洪波,等.基于FPGA技术的模拟地震信号采集系统设计[J].计算机测量与控制,2006.14(4):558-560.
    [3]Gini F,Montanari MVerrazzani L,Esti mation of chirp radar signalincompound-gaussian clutter:a cyclostationary approach[J].IEEETrans.Signal Processing,2000,48(4):1029-1039.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心