共炮(检)点剩余静校正方法
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
本文针对低信噪比、剩余静校正量较大的地震资料,提出了分别计算炮点和检波点剩余静校正量的共地面点剩余静校正方法。该法基于经过动校正后的共炮点数据集和共检波点数据集分别求取检波点剩余静校正量和炮点剩余静校正量,并分别将共炮、检点道集动校正后的叠加道作为模型道与道集内各个道进行互相关,求出各个炮、检波点的剩余静校正量。理论和实际数据的测试表明,这种方法可以解决低信噪比、剩余静校正量较大地震资料的静校正问题。
For the seismic data with low signal to noise ratio and large residual static correction,the common surface point residual static correction method in which the residual static correction for shot point and receiver were respectively calculated was proposed in this paper.Based on the NMO common shot point gathers and NMO common receiver point gathers,the residual static correction on both receiver and shot points were respectively estimated by cross-correlating each trace in the gathers with the model traces which were the stacking traces of the NMO common shot point gathers or the NMO common receiver point gathers respectively.The testing for the theoretical and field data shows that the method could solve the static correction problem for the seismic data with low signal to noise ratio and the large residual static correction.
引文
[1]Wiggins R Aet al.Residual static analysis as a gen-eral linear inverse problem.Geophysics,1976,41(5):922~938
    [2]Kirchhei mer F.Residual static by CDP-localized stackopti mization.Geophysical Prospecting,1990,38(6):577~606
    [3]Ronen J and Claerbout J F.Surface-consistent residu-al static esti mation by stack-power maxi mization.Ge-ophysics,1985,50(12):2759~2767
    [4]Kirkpatrick S et al.Opti mization by si mulated annea-ling.Science,1983,220(11):671~680
    [5]Rothman D H.Nonlinear inversion,statistical me-chanics,and residual statics esti mation.Geophysics,1985,50(12):2784~2796
    [6]国九英,周兴元,李少英.二阶差分最大叠加能量法地表一致性静校正.石油地球物理勘探,1992,27(3):361~370Guo Jiu-ying Zhou Xin-yuan,Li Shao-ying.Surface-consistent statics using second order difference andmaxi mumstack energy.OGP,1992,27(3):361~370
    [7]尹成,周熙襄等.一种改进的遗传算法及其在剩余静校正的应用.石油地球物理勘探,1997,32(4):486~491Yin Cheng,Zou Xi-xiang et al.An ameliorated genet-ic algorithmand its application to residual static cor-rection.OGP,1997,32(4):486~491
    [8]李国发等.转换波地震资料处理的关键问题与解决方法.中国矿业大学学报,2005,34(1):42~45Li Guo-fa et al.Key problems and solutions in pro-cessing converted-wave seismic data.Journal of Chi-na University of Mining&Technology,2005,34(1):42~45
    [9]高磊,潘树林.利用转换波初至进行转换波剩余静校正.大庆石油地质与开发,2008,27(1):130~133Gao Lei,Pan Shu-lin.Using first break of convertedwave to performremaining static calibration.Petrole-um Geology&Oilfield Development in Daqing,2008,27(1):130~133
    [10]杨海申,李彦鹏,陈海清.转换波延迟时静校正.石油地球物理勘探,2006,41(1):13~16Yang Hai-shen,Li Yan-peng and Chen Hai-qing.P-SVconverted wave static corrections by delay ti mes.OGP,2006,41(1):13~16
    [11]赵秀莲,许士勇,马在田.转换波剩余静校正方法与应用.石油地球物理勘探,2004,39(5):533~538Zhao Xiu-lian,Xu Shi-yong,Ma Zai-tian.Method ofPS wave residual static corrections and application.OGP,2004,39(5):533~538
    [12]唐建候,张金山.消除P-SV波大静校正量的方法.石油地球物理勘探,1994,29(5):650~653Tang Jian-hou,Zhang Jin-shan.A method for remo-ving high static corrections of P-SV waves.OGP,1994,29(5):650~653
    [13]陈启元等.复杂山区的静校正方法探讨.石油物探,2001,40(1):73~81Chen Qi-yuan et al.Study on the methods of staticcorrectionin complicated mountain area.GeophysicalProspecting for Petroleum,2001,40(1):73~81
    [14]冯泽元等.利用层析反演技术解决山地复杂区静校正问题.石油物探,2005,44(3):284~287Feng Zey-uan et al.Solving the static correction prob-lemin mountain complex block using tomographic in-version.Geophysical Prospecting for Petroleum,2005,44(3):284~287

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心