广西南丹大厂矿区震源参数研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
利用广西南丹县大厂矿区地震监测台网记录的地震波资料,采用Brune(1970)模型,将速度记录谱归算为震源位移谱,使用遗传算法计算拐角频率及零频极限,然后计算地震矩、应力降等小震震源参数,并系统分析各种参数之间的关系。大厂矿区38次较大地震的震源参数计算结果为:地震矩范围在2.18×1011~7.89×1012 N·m之间;震源破裂半径78~439m;地震应力降在0.01~1.79 MPa之间。表明:地震矩与震级、震源半径、拐角频率之间呈线性关系,而应力降不依赖于地震矩,分布较为离散。大厂矿区应力降值明显偏低,这可能与该区域背景应力低有关。
Using the Brune model(1970)and the digital seismic wave data of the earthquake occurred in Dachang mining area,which was recorded by Guangxi Dachang seismic network;we transferred the velocity spectrum into source displacement spectrum.The corner frequency and zero frequency were calculated by using genetic algorithm,further,the source parameters including seismic moment and stress drop were calculated and the relationships among them were analyzed systematically.This paper studies 38 bigger regional earthquakes occurred in this area,the results show that they seismic moments are 2.18×1011~7.89×1012 Nom and rupture radius are 78~439 m,stress drop are 0.01~1.79 MPa.The relations between seismic moment,body-wave magnitude,rupture radius and corner frequency are near log-linear.The distribution of stress drop is dispersed and show little obvious correlation with seismic moment.Dachang mining stress drop values significantly lower,this may be related to the low regional background stress.
引文
[1]夏爱国,赵翠萍.天山中东段地区震源参数的初步应用研究[J].内陆地震,2006,20(3):245-251.
    [2]赵翠萍,陈章立,华卫,等.中国大陆主要地震活动区中小地震震源参数研究[J].地球物理学报,2011,54(6):1481-1489.
    [3]Atkinson G M,R F Mereu.The shape of ground motion attenuation curves in Southeastern Canada[J].Bull.Seism.Soc.Am.,1992,82(5):2014-2031.
    [4]Moya A,Jorge A.Inverson of source parameters and site effects from strong ground motion record using genetic algorithms[J].Bull.Seism.Soc.Am.,2000,90(4):977-992
    [5]Bindi D,Spallarossa D,Augliera P,et al..Source parameters estimated from the aftershock of the 1997Umbria Marche(Italy)seismic sequence[J].Bull.Seis.Soc.Am.,2001,91(3):448-455.
    [6]刘杰,郑斯华,黄玉龙.利用遗传算法反演非弹性衰减系数、震源参数和场地响应[J].地震学报,2003,25(2):211-218.
    [7]郭晓,张元生,莘海亮,等.祁连山中东段地区非弹性衰减系数、震源参数和场地响应研究[J].西北地震学报,2007,29(4):319-325.
    [8]朱新运,于俊谊.基于MATLAB的小震震源参数计算软件研制[J].西北地震学报,2008,30(4):380-384.
    [9]张永久,乔慧珍.紫坪铺水库库区震源波谱参数研究[J].西北地震学报,2011,33(2):117-122.
    [10]姚宏,郭培兰,龙政强,等.广西南丹大厂矿区地震活动特征分析[J].地震,2011,31(3):112-120.
    [11]蔡明海,梁婷,吴德成,等.广西大厂矿田花岗岩地球化学特征及其构造环境[J].地质科技情报,2004,23(2):57-62.
    [12]陈毓川,黄民智,徐钰,等.大厂锡矿地质[M].北京:地质出版社,1993.
    [13]张华,张忠利,姚宏,等.基于遗传算法的大厂矿区地震定位研究[J].工程地球物理学报,2014,11(2):260-265.
    [14]兰从欣,刘杰,郑斯华,等.北京地区中小地震震源参数反演[J].地震学报,2005,27(5):498-507.
    [15]秦嘉政,叶建庆,钱晓东,等.2000年姚安地震的震源参数[J].地球物理学报,2003,46(5):633-641.
    [16]Chael E.Spectral sealing of earthquakes in the Miramiehi region of New Brunswick[J].BSSA,1987,77,347-365
    [17]Bakun W H.Seismic moment,local magnitudes and coda-duration magnitude for earthquakes in central California[J].BSSA,1984,74:439-458.
    [18]于俊谊,朱新运.浙江珊溪水库地震震源参数研究[J].中国地震,2008,24(4):379-387.
    [19]刘丽芳,秦嘉政.会泽5.3级和文山5.3级地震序列震源参数研究[J].地震研究,2006,29(1):43-49.
    [20]师海阔,朱新运,贺永忠,等.宁夏及邻区地震震源参数研究[J].大地测量与地球动力学,2010,30(S1):38-43.
    [21]刘学军,叶建庆,蔡绍平,等.腾冲火山区地震的震源参数[J].防灾减灾工程学报,2004,24(1):22-27.
    [22]刘学军,叶建庆,蔡绍平,等.姚安地震序列的震源参数研究[J].地震研究,2002,25(3):240-245.
    [23]张永久,程万正.用S波研究雅江地震序列震源波谱[J].中国地震,2003,19(4):340-350.
    [24]张永久,彭立国,程万正.马尔康地震序列震源参数研究[J].中国地震,2006,22(1):85-91.
    [25]姚立珣,钟羽云,张震峰,等.岩体裂隙充水后对拐角频率的影响[J].西北地震学报,2004,26(4):315-321
    [26]华卫,陈章立,郑斯华,等.水库诱发地震与构造地震震源参数特征差异性研究——以龙滩水库为例[J].地球物理学进展,2012,27(3):924-935.
    [27]李立平,李一正,叶建庆,等.澜沧一耿马地震震源动力学参数研究[J].地震研究,1990,13(3):223-233.
    [28]Abercrombie R E.Leary P.Source parameters of small earthquakes recorded at 2.5km depth,Cajon Pass Southern California:implications for earthquake scaling[J].Geophys.Res.Lett.,1993,20(14):1511-1514.
    [29]董春丽,王向阳,郑树平,等.山西省内连续5次ML≥4.0地震序列震源区附近应力降的初步研究[J].华北地震科学,2013,31(3):14-22.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心