复杂构造区三维观测系统设计的几点探讨
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
常规地震勘探采集中,观测系统设计是基于共中心点(CMP)理论进行的,传统的地震采集设计方法已不能完全满足日趋复杂的勘探状况。从叠加响应出发,分析了观测系统的采集脚印和叠前偏移噪声对地震采集数据的影响,通过地震照明技术,得到了基于目的层共反射点(CRP)的面元信息,面元随偏移距变化的覆盖次数和能量(振幅)分布,经过优选炮检点位置,可以使目的层覆盖次数以及面元叠加能量尽量均匀,提高地震资料成像效果。
The observation system design was based on the common midpoint(CMP)theory in the data acquisition of conventional seismic exploration,and the design method of traditional seismic acquisition could not completely meet the needs of increasingly complicated exploration situation.In this paper,starting from the stacked response,the influence of footprints of the observation system and the prestack migration noise on the data acquisition was analyzed,through the seismic lighting technology,the bin information of common reflection point(CRP)based on objective layer was obtained,the folds and energy(amplitude)distribution were change with offset.And through optimizing the position of shots and receivers,the folds and stack bin energy of objective layer can be even as far as possible,it can be used to improve the effect of imaging data.
引文
[1]秦广胜,蔡其新,刘学伟.满足叠前偏移要求的三维地震观测系统设计[J].石油地球物理勘探,2010,45(S1):25~29.
    [2]碗学俭,王广智,杨波,等.影响观测系统采集脚印的因素分析[J].中国石油勘探,2009,14(6):60~64.
    [3]尹成,吕公河,田继东,等.三维观测系统属性分析与优化设计[J].石油地球物理勘探,2005,40(5):495~498,509.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心