裂缝检测方法研究在普光地区的应用
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
本次研究综合应用成像测井和岩心资料来识别裂缝。从井震联合层位标定入手,以弹性参数特征分析为基础,利用叠前地震资料,建立裂缝地震响应模式,分析裂缝各向异性对应的地震属性变化规律,用地震叠前叠后多属性预测的裂缝进行约束和验证,通过分方位角各向异性分析,裂缝参数计算,优选地震属性,获得裂缝展布方位和发育密度等参数。
Imaging logging and core data are applied in this paper to recognize fractures. The fracture earthquake response mode is established on the basis of on the characteristics of elastic parameters and pre-stack seismic data as well as the well-seismic joint horizon calibration. The changes of seismic attributes corresponded to crack anisotropy are analyzed. The fractures predicted by pre- and post-stack seismic multi-attribute are restrained and verified through analysis on azimuthal anisotropy,calculating parameters and optimizing seismic attributes to obtain fracture parameters such as spread orientation,development density.
引文
[1]尹志军,黄述旺,陈崇河.用三维地震资料预测裂缝[J].石油勘探与开发,Vol.26,No.1,78-80.
    [2]袁士义,宋新民,冉启全.裂缝性油藏开发技术[M].北京:石油工业出版社,86-115.
    [3]穆龙新,赵国良,田中元等,储层裂缝预测研究[J].195-203.
    [4]王永刚,李振春,邵雨.利用地震资料预测储层裂隙发育带[J].石油大学学报:自然科学版,2000,24(4):79-82.
    [5]张家震,王学军,王永刚等.潜山油藏多尺度相干体分析方法[J].石油物探,2004,37-40.
    [6]刘麟,阳芳,地震属性在勘探阶段中的应用[J].石油物探,2004,43(增刊):34-39.
    [7]童亨茂,钱祥麟,储层裂缝的研究和分析方法[J].石油大学学报:自然科学版,1994,18(6):14-19.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心