GPS授时地震仪走时误差校正
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
受制造成本和工艺的限制,GPS授时地震仪中的守时晶振不可避免地会有频率误差,继而在数据采集过程中,随着采集时间的增加,各台站之间会出现采集不同步现象。介绍了Akima分段多项式插值重采样方法及其在GPS授时地震仪时间校正中的应用。通过对理论数据与实际数据的Akima插值重采样试验表明,Akima插值重采样方法可应用于GPS授时地震仪走时误差校正,是一种简便、高效、保形性好的插值重采样方法。
Because of constraints of manufacturing costs and process, timing crystal in seismograph with GPS clock has inevitably frequency error. So, in the process of data acquisition, with the increase in acquisition time, non-synchronous phenomenon occurs between acquisition stations. The paper describes the Akima piecewise polynomial interpolation resampling method and its application in time correction of seismograph GPS clock. Akima interpolation by theoretical data and actual data resampling test showed that Akima interpolation resampling method can be applied to travel time error correction of seismograph with GPS time, is a simple, efficient, good shape retention interpolation resampling method.
引文
[1]李庆忠.石油物探领域的创新意识与求实精神[J].石油地球物理勘探,2011,46(6):995–1011.
    [2]陈联青,贾艳芳,顾欣莉.GPS授时(网络)地震仪[J].物探装备,2006,16(增刊1):1–7.
    [3]邵才瑞.井筒数据的Akima插值重采样方法[J].测井技术,2004,28(2):112–114.
    [4]AKIMA H.A new method of interpolation and smooth curve fitting based on local procedures[J].J.A CM,1970,17(4):589–602.
    [5]聂桂根,万剑华.Akima插值法在测量中的应用[J].测绘科技动态,1998,1(3):31–34.
    [6]徐士良.常用算法程序集(C语言描述)[M].北京:清华大学出版社,2004.
    [7]张国琴,吴昱蓉.基于GPS校准晶振的高精度时钟的设计[J].仪表技术,2010(4):23–24.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心