用地震波频谱计算Q值的新方法
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
在研究用频谱比率法计算Q值局限性的基础上,提出了基于地震波频谱计算Q值的新方法。利用相邻两个反射信号频谱的主频及其斜率,或对第二个反射信号的频谱进行Q扫描补偿,使该频谱与第一个反射信号频谱间的相似系数最大或两者主频相同的方法计算Q值。这些方法克服了频谱比率法的不稳定性。
On the basis of studing the limitations of spectrum ratio method forcalculating the seismic quality factor Q,this article puts forward several new methods.These methods make use of the main frequancies computed from reflection signals whichare reflected by two interfaces of a layer and the slope of the spectrum,or compensate thesecond spectrum by different Q value.When the main frequencies are the same,or theresemblance coefficient of the spectrums is maximal,Q can be obtained.These methodsare better than spectrum ratio method in some aspects.
引文
1RainerTonn.ThedeterminationoftheseismicqualityfactorQfromVSPdata:Acomparisonofdifferentcomputationalmethods.GeophysicalProspecting,1991,39(1)2RaikesSA,WhiteRE.Measurementsofcarthattenu1ationfromdownholeandsurfaceseismicrecordings.GeophysicalProspecting,1984,32:829~9193梁光河,刘清林,何樵登.用非线性参数拟合法反演Q值.石油地球物理勘探,1992,27(2)4杨宝俊,张伯军,杨有发等.地震勘探频率中近抛物线型衰减的物理解释,长春地质学院学报,1990,20(3):323~3305杨宝俊编著.勘探地震学导论.长春:吉林科学技术出版社,19906GanleyDC.Amethodforcalculatingsyntheticseismogramswhicincludetheeffectofabsorptionanddispersion,Geophysics,1981,46:1100~1107

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心