某高温气冷堆核电厂结构地震反应分析
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
以某高温气冷堆核电厂结构为原型,利用有限元软件建立三维结构实体模型,开展了模态分析和弹性动力时程分析的数值计算,以探讨某高温气冷堆核电厂的结构特性和抗震性能,并重点分析了在三向地震动作用下高温气冷堆核电厂的加速度、位移反应时程和楼层反应谱。总体上看,高温气冷堆核电厂在两个水平向的刚度比较均匀,楼层反应接近,布局较为合理;在三向地震动作用下,顶层中心点的竖向楼层反应均明显大于两水平方向楼层反应,因此在高温气冷堆核电厂结构设计中,应关注竖向地震动对核电厂地震反应带来的不利影响。
In order to understand the structural characteristics and seismic performance of high temperature gas cooled reactor nuclear power plant, we established a three dimensional finite element model by using the finite element software, carried out the numerical calculation of modal frequency and dynamic elastic time history, and analyzed acceleration, displacement time history and floor response spectrum of nuclear power plant under three directions ground motion. Our results showed that:(1) The structure's stiffness of two horizontal directions is uniformity, so the structure of nuclear power plant is reasonable;(2) The vertical floor response of the top center were much greater than the horizontal floor response under the three-dimensional earthquake's loading. So we should pay more attentions to the disadvantageous influence of the nuclear power plant under the vertical seismic loading in the design.
引文
陈岩,2005.基于三维实体模型的核电厂结构楼层反应谱分析.天津:天津大学.
    李忠献,陈岩,梁万顺等,2005a.核电厂结构的楼层反应谱分析.福州大学学报,33(增刊):62—67.
    李忠献,李忠诚,沈望霞,2005b.核反应堆厂房结构楼层反应谱的敏感性分析.核动力工程,26(1):44—50.
    林皋,2011.核电工程结构抗震设计研究综述(I).人民长江,42(19):1—6.
    潘华,李金臣,张志中,2007.2006年12月26日台湾恒春海外地震及其对核电厂的影响.震灾防御技术,2(1):11—18.
    潘宇,吕令毅,束磊等,2010.三门峡核电站弹塑性时程分析.建筑与结构设计,(2):21—24.
    荣峰,2003.核反应堆工程地基-结构相互作用与楼层反应谱.天津:天津大学.
    孙造占,黄炳臣,2011.核安全审评中的竖向地震反应谱.核安全,(4):12—17.
    谢礼立,翟长海,2012.核电工程应用隔震技术的可行性探讨.地震工程与工程振动,32(1):1—10.
    周伯昌,2007.不同地震环境下核电厂结构地震反应特性分析.北京:中国地震局地球物理研究所.
    朱秀云,潘蓉,李建波,2012.考虑SSI效应的核电站反应堆厂房楼层反应谱分析.见:第十七届全国反应堆结构力学会议.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心