上承式单肋拱桥稳定特性研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
该文以孙家凹桥为背景,讨论了上承式单肋拱桥的构造特点,研究了钢管混凝土拱肋刚度计算方法以及拱肋填充混凝土程度对其稳定特性的影响,得出结论,可为今后该类桥型的设计提供参考。
Taking a concave bridge in Sunjia as the background, the article discusses the construc- tion characteristics of deck single- rib arch bridge, studies the rigidity calculation method of steel- pipe concrete arch rib and the influence of filling concrete level into arch rib on its stabilizing characteristics, and gives the conclusion able to provide the reference for the design of this kind of bridge in the future.
引文
[1]白宝鸿.法国昂特那斯钢管拱桥[J].国外桥梁,1998(3).
    [2]钱建漳.张卫东.横跨布尔诺——维也纳高速公路的拱桥[J].国外桥梁,2001(1).
    [3]陈宝春.钢管混凝土拱桥设计与施工[M].北京:人民交通出版社,1999.
    [4]李国豪.桥梁结构稳定与振动[M].北京:中国铁道出版社,1992.
    [5]陈宝春,韦建康.钢管混凝土(单圆管)拱肋刚度对其动力特性的影响[J].地震工程与工程振动,2004(3).
    [6]CECS28∶90,钢管混凝土结构设计与施工规程[S].北京:中国计划出版社,1990.
    [7]JCJ01-89,钢管混凝土结构设计与施工规程[S].上海:同济大学出版社,1989.
    [8]DL/T-5085-1997,钢-混凝土组合结构设计规程[S].北京:中国电力出版社,1999.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心