基于超声波的预应力波纹管注浆密实性与空洞部位检测技术
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
为了探索超声波对波纹管注浆密实性与空洞部位的检测能力,先采用弹性波对注浆波纹管及混凝土(即避开波纹管)进行检测,通过数据对比分析,判断出存在缺陷的波纹管;再采用超声波对存在缺陷的波纹管进行检测,对检测数据进行分析研究,判断缺陷在波纹管中的具体位置及大小。试验梁的验证结果表明,用该方法判断出的空洞位置及大小与实际设缺情况基本一致,因此用该方法检测预应力波纹管注浆密实性与空洞部位是可行的,从而为波纹管注浆检测提供了理论指导。
A method to explore detecting function for grouted density and empty hole of corrugated pipe is proposed in the paper.Firstly,the grouted corrugated pipes and concrete(avoiding corrugated pipes) were detected by using elastic wave to judge defective corrugated pipes through comparative analysis of the data.Secondly,the defective corrugated pipes were detected using ultrasonic wave to determine the specific location and size of defect in corrugated pipes by the analysis of the test data.Finally,the above-mentioned results were verified by actual experiment.The result shows that judged location and size of the empty hole are consistent with the actual situation.So it is feasible to detect grouted density and empty hole of pre-stressed corrugated pipe with the method.The presented method provides theoretical guidance for grouted detection of corrugated pipe.
引文
[1]周永厚,高峰.混凝土无损检测技术[M].北京:中国建材工业出版社,1996.
    [2]New tson Craig M,Eberhard Marc O.NondestructiveEvaluation Using Numerical Sinulation of Inpact Re-sponse[J].ACIM atericals Journal,2000,97(8):343-350.
    [3]Saka M,Salam AkandaM A.Ultrasonic measurementof the crack depth and the crack opening stress intensi-ty factor under a no bad condition[J].Journal of Non-destructive Evaluation,2004,23(2):49-63.
    [4]黄万春,黄卓,罗滨涛.冲击弹性波技术在探测大体积混凝土结构深部裂缝中的应用[J].世界地震工程,1997,13(4):47-51.
    [5]贾志绚,陈永会,赵星,等.基于弹性波法的高速公路护栏立柱埋深检测方法研究[J].公路交通科技,2010,27(11):127-131.
    [6]国家建筑工程质量监督检测中心.混凝土无损检测技术[M].北京:中国建材工业出版社,1996.
    [7]罗登林,丘泰球,卢群.超声波技术及应用(Ⅰ)-超声波技术[J].日用化学工业,2005,35(5):323-326.
    [8]CECS21—2000超声法检测混凝土缺陷技术规程[S].

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心