无线传感器网络在矿山微震定位系统中的应用
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
针对传统矿山定位监测系统中有线方式成本高、资源浪费、可操作性差等问题,将无线传感器网络技术应用于矿山微震定位。通讯系统采用由末端网络节点和中心节点构成的星形无线传感器网络结构。应用时钟同步技术,末端节点将矿震信号通过射频模块上传给中心节点,进而通过上位机完成对数据的进一步处理。该系统为无线通信在矿山越界开采监测中的应用研究。
In view of the high cost,resources waste and poor maneuverability in cable methods in mine monitoring system,by application of wireless sensor networks,a system of mine micro-vibration location is built in this paper.The star wireless sensor network is made up of the end network nodes and the center network node.In order to achieve the purpose of synchronization acquisition,clock synchronization technology was adopted.The signal was transmitted to the center node through the RF module and was processed by the PC.This system is an application research on radio communication in Crossborder mining monitoring.
引文
[1]李庶林,尹贤刚,郑文达,等.凡口铅锌矿多通道微震监测系统及其应用研究[J].岩石力学与工程学报,2005,24(12):2048-2053.
    [2]汪令辉.微震监测系统在冬瓜山铜矿的应用[J].现代矿业,2009,12(12):102-103.
    [3]谭朋柳,金海,张明虎.分布式实时系统的集中式相对时钟同步方法[J].华中科技大学学报,2007,35(2):16-18.
    [4]王军.地震测量数据无线传输与监控系统[D].武汉:华中科技大学电子与信息工程系,2005.
    [5]聂光义.点对多点多任务无线通信[J].电子质量,2003(4):152-154.
    [6]薛强.震源定位系统在矿山越界开采监控中的应用研究[D].石家庄:石家庄铁道大学电气与电子工程学院,2011.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心