基于微震和应力在线监测的深井综放采场支承压力分布特征
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
为研究深井综放采场支承压力分布特征,采用微震和应力在线监测技术对赵楼煤矿1306工作面走向煤体垂直应力进行了现场实测。研究表明:工作面推进过程可分为初采阶段、工作面"见方"阶段和正常推进阶段。工作面"见方"阶段存在初始影响范围、显著影响范围和剧烈影响范围,初采和正常推进阶段超前支承压力没有明显的剧烈上升阶段;工作面"见方"阶段超前支承压力影响范围和相对垂直应力为其他2个阶段的1.5~1.7倍;数值模拟分析与现场实测结果吻合较好。根据支承压力分布特征,确定了不同回采阶段的合理超前支护距离和解危措施。
In order to study the characteristics of the deep shaft full-mechanized caving mining abutment pressure distribution, field measurement focusing on vertical stress has been carried out by using microseismic and online stress monitoring system at 1306 working face in Zhaolou mine.The research shows that the process of workface extracting can be divided into three stages: initial mining stage, "square stage" and normal mining stage. Advanced abutment pressure of the "square stage" exists three parts, that is the initial affect range, significantly affect range and severe affect range. The initial and normal mining stage has no obvious rising stage. The abutment pressure affect scope and the peak stress of the "square stage" are 1.5-1.7 times higher than those of the other two stages. According to the characteristics of abutment pressure distribution, reasonable advance support distance and controlling measures of different recovery stages were determined.
引文
[1]何满潮,谢和平,彭苏萍,等.深部开采岩体力学研究[J].岩石力学与工程学报,2005,24(16):2803-2813.HE Manchao,XIE Heping,PENG Suping,et al.Study on rock mechanics in deep mining engineering[J].Chinese Journal of Rock Mechanics and Engineering,2005,24(16):2803-2813.
    [2]谢文兵,笪建原,冯光明.综放沿空留巷围岩控制机理[J].中南大学学报,2004,35(14):657-661.XIE Wenbing,DA Jianyuan,FENG Guangming.Mechanism of controlling surrounding rock around gob-side entry retaining in top-coal caving mining face[J].Journal of Central South University,2004,35(14):657-661.
    [3]王德超,李术才,王琦,等.深部厚煤层综放沿空掘巷煤柱合理宽度试验研究[J].岩石力学与工程学报,2014,33(3):539-548.WANG Dechao,LI Shucai,WANG Qi,et al.Experimental research on reasonable coal pillar width in fully mechanized top coal caving face of deep thick coal seam[J].Chinese Journal of Rock Mechanics and Engineering,2014,33(3):539-548.
    [4]史红,姜福兴.充分采动阶段覆岩多层空间结构支承压力研究[J].煤炭学报,2009,34(5):605-609.SHI Hong,JIANG Fuxing.The dynamic abutment pressure rule of overlying strata spatial structures at the phases sub-critical mining[J].Journal of China Coal Society,2009,34(5):605-609.
    [5]秦忠诚,王同旭.深井孤岛综放面支承压力分布及其在底板中的传递规律[J].岩石力学与工程学报,2004,23(7):1127-1131.QIN Zhongcheng,WANG Tongxu.Abutment pressure distribution and its transfer law in floor of deep isolated fully-mechanized mining faces using sublevel caving[J].Chinese Journal of Rock Mechanics and Engineer-ing,2004,23(7):1127-1131.
    [6]司荣军,王春秋,谭云亮.采场支承压力分布规律的数值模拟研究[J].岩土力学,2007,28(2):351-354.SI Rongjun,WANG Chunqiu,TAN Yunliang.Numerical simulation of abutment pressure distribution laws of working faces[J].Rock and Soil Mechanics,2007,28(2):351-354.
    [7]刘长友,黄炳香,孟祥军,等.超长孤岛综放工作面支承压力分布规律研究[J].岩石力学与工程学报,2007,26(增刊1):2761-2766.LIU Changyou,HUANG Bingxiang,MENG Xiangjun,et al.Research on abutment pressure distribution law of overlength isolated fully-mechanized top coal caving face[J].Chinese Journal of Rock Mechanics and Engineering,2007,26(Sup 1):2761-2766.
    [8]谢广祥,杨科,常聚才,等.综放采场围岩支承压力分布及动力灾害的层厚效应[J].煤炭学报,2006,31(6):731-735.XIE Guangxiang,YANG Ke,CHANG Jucai,et al.Surrounding rock abutment pressure distribution and thickness effect of dynamic catastrophic in fully mechanized sublevel mining stope[J].Journal of China Coal Society,2006,31(6):731-735.
    [9]刘金海,姜福兴,冯涛.C型采场支承压力分布特征的数值模拟研究[J].岩土力学,2010,31(12):4011-4015.LIU Jinhai,JIANG Fuxing,FENG Tao.Numerical simulation of abutment pressure distribution of C-shaped stope[J].Rock and Soil Mechanics,2010,31(12):4011-4015.
    [10]姜福兴,杨淑华,成云海,等.煤矿冲击地压的微地震监测研究[J].地球物理学报,2006,49(5):1511-1516.JIANG Fuxing,YANG Shuhua,CHENG Yunhai,et al.A study on microseismic monitoring of rock burst in coal mine[J].Chinese Journal of Geophysics,2006,49(5):1511-1516.
    [11]姜福兴,杨淑华,XUN Luo.微地震监测揭示的采场围岩空间破裂形态[J].煤炭学报,2003,28(4):357-360.JIANG Fuxing,YANG Shuhua,XUN Luo.Spatial fracturing progresses of surrounding rock masses in longwall face monitored by microseismic monitoring techniques[J].Journal of China Coal Society,2003,28(4):357-360.
    [12]成云海,姜福兴,张兴民,等.微震监测揭示的C型采场空间结构及应力场[J].岩石力学与工程学报,2007,26(1):102-107.CHENG Yunhai,JIANG Fuxing,ZHANG Xingmin,et al.C-shaped strata spatial structure and stress field in longwall face monitored by microseismic monitoring[J].Chinese Journal of Rock Mechanics and Engineering,2007,26(1):102-107.
    [13]夏永学,潘俊锋,王元杰,等.基于高精度微震监测的煤岩破裂与应力分布特征研究[J].煤炭学报,2011,36(2):239-243.XIA Yongxue,PAN Junfeng,WANG Yuanjie,et al.Study of rule of surrounding rock failure and stress distribution based on high-precision microseismic monitoring[J].Journal of China Coal Society,2011,36(2):239-243.
    [14]夏永学,蓝航,毛德兵,等.基于微震监测的超前支承压力分布特征研究[J].中国矿业大学学报,2012,40(6):868-873.XIA Yongxue,LAN Hang,MAO Debing,et al.Study of the lead abutment pressure distribution base on microseismic monitoring[J].Journal of China University of Mining&Technology,2012,40(6):868-873.
    [15]孔令海,姜福兴,杨淑华,等.基于高精度微震监测的特厚煤层综放工作面顶板运动规律[J].北京科技大学学报,2010,32(5):552-558.KONG Linghai,JIANG Fuxing,YANG Shuhua,et al.Movement of roof strata in extra-thick coal seams in top-coal caving mining based on a high precision microseismic monitoring system[J].Journal of University of Science and Technology Beijing,2010,32(5):552-558.
    [16]孔令海,姜福兴,刘杰,等.特厚煤层综放工作面区段煤柱合理宽度的微地震监测[J].煤炭学报,2009,34(7):872-874.KONG Linghai,JIANG Fuxing,LIU Jie,et al.Research on reasonable width of segment pillar of fully mechanized caving face in extra-thick coal seam of deep shaft[J].Journal of China Coal Society,2009,34(7):872-874.
    [17]刘金海,姜福兴,王乃国,等.深井特厚煤层综放工作面支承压力分布特征的实测研究[J].煤炭学报,2011,36(增刊1):18-22.LIU Jinhai,JIANG Fuxing,WANG Naiguo,et al.Survey on abutment pressure distribution of fully mechanized caving face in extra-thick coal seam of deep shaft[J].Journal of China Coal Society,2011,36(Sup 1):18-22.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心