少钢支撑RC框架结构的概念
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
震害表明,在钢筋混凝土(RC)框架结构中增设少量支撑,可以解决纯框架结构抗震防线单一、缺乏足够冗余度的问题,通过多重抗震防线,保护主体结构构件、减小建筑震害、增加结构的安全储备和防倒塌能力。我国现行规范对含有少量剪力墙的框架结构已经有了明确定义和相应的设计方法,而对于含有少量支撑的框架结构没有定义。该文以一个典型RC框架结构及三个带不同钢支撑的RC框架结构为例,基于弹性分析和弹塑性Pushover分析,借鉴少墙框架的定义方法,提出了以底层框架倾覆力矩分担率为控制指标的少钢支撑RC框架结构的定义,并通过基于IDA的结构抗倒塌易损性分析验证了少钢支撑RC框架结构相比纯框架结构的抗倒塌能力提高。
The seismic damage of reinforced concrete(RC) frame structures during earthquakes has indicated that the widely used RC frame structures are lack of sufficient redundancy under earthquake actions. The damage of RC columns in a RC frame leads to its serious damage even collapses during a strong earthquake. If few steel braces are installed, the RC frame will become multi-fortification with steel braces as its first yielding structure elements and RC frame structure elements will be protected and its damage will be delayed. As a result, its safety margin and collapse-resisting capacity will be improved. According to a RC frame structure with few shear walls,this paper proposed the new conception of a RC frame structure with few braces. A typical RC frame structure and3 RC frame structures with different braces are studied to achieve the definition of a RC frame structure with few braces based on the overturning moment carried by a frame part. With few steel braces, the collapse-resistant capacities of a RC frame structure is proved through a collapse fragility analysis based on an incremental dynamic analysis(IDA).
引文
[1]叶列平,曲哲,马千里,林旭川,陆新征,潘鹏.从汶川地震框架结构震害谈“强柱弱梁”屈服机制的实现[J].建筑结构,2008,38(11):52―59.Ye Lieping,Qu Zhe,Ma Qianli,Lin Xuchuan,Lu Xinzheng,Pan Peng.Study on ensuring the strong column-weak beam mechanism for RC frames based on the damage analysis in the Wenchuan earthquake[J].Building Structure,2008,38(11):52―59.(in Chinese)
    [2]郝进锋,王振,陶贵闪,李艳秋.地震区城镇建筑框架结构概念设计[J].世界地震工程,2007,23(1):119―124.Hao Jinfeng,Wang Zhen,Tao Guishan,Li Yanqiu.Conceptual design of town frame structure in earthquake areas[J].World Earthquake Engineering,2007,23(1):119―124.(in Chinese)
    [3]JGJ 3-2010,高层建筑混凝土结构技术规程[S].北京:中国建筑工业出版社,2010.JGJ 3-2010,Technical specification for concrete structures of tall building[S].Beijing:China Architecture&Building Press,2010.(in Chinese)
    [4]朱炳寅.对少量剪力墙的框架结构的理解与设计建议[J].建筑结构,2011,41(1):15―I7.Zhu Bingyin.Understanding and design suggestions on frame structures with few shear walls[J].Building Structure,2011,41(1):15―I7.(in Chinese)
    [5]GB 50011-2010,建筑抗震设计规范[S].北京:中国建筑工业出版社,2010.GB 50011-2010,Code for seismic design of buildings[S].Beijing:China Architecture&Building Press,2010.(in Chinese)
    [6]刘庆志.钢支撑及少支撑框架结构抗震性能研究[D].北京:清华大学,2011.Liu Qingzhi.Study on seismic behavior of steel braces and RC frames with a small quantity of steel braces[D].Beijing:Tsinghua University,2011.(in Chinese)
    [7]中国建筑科学研究院PKPMCAD工程部,多层及高层建筑结构空间有限元分析与设计软件(墙元模型)Satwe2010用户手册及技术条件[M].北京:中国建筑工业出版社,2011:78―145.User’s guidance and technique support of a space finite element analysis and design software of multi story buildings and highrise buildings Satwe2010(wall element model)[M].Beijing:China Architecture Industry Press,2011:78―145.(in Chinese)
    [8]马宁.全钢防屈曲支撑及其钢框架结构抗震性能与设计方法[D].哈尔滨:哈尔滨工业大学,2010.Ma Ning.Seismic behavior and design method of all-steel buckling restrained braces and steel frames[D].Harbin:Harbin Institute of Technology,2010.(in Chinese)
    [9]李国强,王鹏,刘玉姝,蔡克铨.BRB应用于混凝土框架的弹性层间位移角限值与设计建议[J].工程抗震与加固改造,2013,35(2):91―96.Li Guoqiang,Wang Peng,Liu Yushu,Cai Kequan.Story drift limit for BRB-concrete frame structures and design suggestions[J].Earthquake Resistant Engineering and Retrofitting,2013,35(2):91―96.(in Chinese)
    [10]Mazzoni S,Mckenna F,Scott M H,Fenves G L.Opensees command language manual[CP].http://Opensees.Berkeley.edu/OPENSEES/manuals/usermanual/Opensees Command Language Manual,2006-6-19.
    [11]Scott B D,Park R,Priestley M J N.Stress-strain behavior of concrete confined by overlapping hoops at low and high strain rates[J].ACI Journal,1982,79(2):13―27.
    [12]Karsan I D,Jirsa J O.Behavior of concrete under compressive loading[J].Journal of Structural Division ASCE,1969,95(ST12):2543―2563.
    [13]CECS392-2014,建筑结构抗倒塌设计规范(征求意见稿)[S].2014.CECS392-2014,Specification for anti-collapse design of building structures(exposure draft)[S].2014.(in Chinese)
    [14]ATC-40.Seismic Evaluation and Retrofit of Concrete Buildings[R].California,Redwood City:Applied Technologh Council,1996.
    [15]Kircher C A,Heintz J A.The ATC-63 project[J].Building Safety Journal,2008,61(1):40―43.
    [16]施炜,叶列平,陆新征,唐代远.不同抗震设防RC框架结构抗倒塌能力的研究[J].工程力学,2011,28(3):41―48.Shi Wei,Ye Lieping,Lu Xingzheng,Tang Daiyuan.Study on the collapse-resistant capacity of RC frames with different seismic fortification levels[J].Engineering Mechanics,2011,28(3):41―48.(in Chinese)

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心