消除滑动扫描地震数据中谐波干扰的反相关方法(英文)
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
滑动扫描技术是高效、高保真、环保的可控震源勘探技术之一,是下一组震源不必等待上一组震源震动结束即可开始震动的高效采集方法。该技术由于缩短了相邻两炮的等待时间,使得生产效率得到显著提高。但是后一炮的谐波畸变与前一炮的基波信号混叠在一起,不易分离,在相关后的地震记录上形成了严重的谐波干扰,降低了地震资料的质量。本文提出一种反相关方法来压制滑动扫描地震数据中的谐波干扰。该方法首先把地面力信号分解为基波和各阶谐波分量;然后将后一炮的相关前数据分别与各分量相关,只选取正时间轴中对应分量的自相关部分,利用各分量的反相关算子提取各阶谐波信息;最后从前一炮数据中减去提取出的高阶谐波,得到压制谐波后的地震记录。该方法对有效信号影响小,可同时处理相关前和相关后数据,而且算法简单稳定,计算效率高。本文分别对理论模型和实际数据进行处理,验证了该方法消除谐波干扰的有效性。
The slip-sweep technique is one of the high-efficiency, high-fidelity, and environmental vibroseis seismic prospecting techniques which consists of a vibrator group sweeping without waiting for the previous group’s sweep to terminate. The cycle time can be reduced drastically and hence the production efficiency can be increased significantly but harmonic distortion of one sweep will leak into the record of the other sweep. In this paper, we propose an anti-correlation method for removing harmonic distortion in vibroseis data. This method is based on decomposition of the ground force signal into fundamental and harmonic components. Then the corresponding anti-correlation operator can be computed to estimate the energy of each harmonic after correlating the vibroseis data with the corresponding harmonic component. Finally, the vibroseis harmonic noise to be removed can be obtained by subtracting the extracted harmonic noise from the traces of the previous group’s sweep. The advantage of the proposed method is that it can process both uncorrelated and correlated vibroseis seismic data. Moreover, the algorithm is simple, stable, and computationally fast. Especially, the significant contribution of this method is a considerable reduction in the harmonic without any alteration of the desired signals. The method was tested on both synthetic and field data sets to validate the good harmonic noise suppression results.
引文
Abd El-Aal, A. K., 2010a, Harmonic by harmonicremoval technique for improving vibroseis data quality:Geophysical Prospecting, 59(2), 279 – 294.
    Abd El-Aal, A. K., 2010b, Eliminating upper harmonicnoise in vibroseis data via numerical simulation:Geophysical Journal International, 181, 1499 – 1509.
    Bagaini, C., 2010, Vibroseis acquisition method: U. S.Patent 2010/0142320 A1.
    Do, V. C., and Bagaini C., 2010, On the accuracy of harmonic estimation from weighted-sum ground force:72nd EAGE Conference and Exhibition, ExpandedAbstracts, 61 – 65.
    Fleure, J. T., 2002, Method of reducing interference while using overlapping source point seismic recordingtechniques: U. S. Patent 6 418 079.
    Li, X. P., Sollner, W., and Hubral, P., 1995, Elimination of harmonic distortion in vibroseis data: Geophysics, 60(2),503 – 516.
    Meunier, J., and Bianchi, T., 2002, Harmonic noisereduction opens the way for array size reduction invibroseis operations: 72nd Ann. Internat. Mtg., Soc.Expl. Geophys., Expanded Abstracts, 70 – 73.
    Meunier, J., and Bianchi, T., 2004, Method of reducing harmonic noise in vibroseismic signals: Patent WO2004/031806 A2.
    Meunier, J., and Bianchi, T., 2005, Cost-effective, high-density vibroseis acquisition: 75th Ann. Internat. Mtg.,Soc. Expl. Geophys., Expanded Abstracts, 44 – 47.
    Moerig, R., 2007, Method of harmonic noise attenuation in correlated sweep data: U. S. Patent 7 260 021.
    Moro, G. D., Scholtz, P., and Iranpour, K., 2007, Harmonicnoise attenuation for vibroseis data: GNGTS Session,32(2), 511 – 513.
    Rietsch, E., 1981, Reduction of harmonic distortion invibratory source records: Geophysical Prospecting,29(2), 178 – 188.
    Rozemond, H. J., 1996, Slip sweep acquisition: 66th Ann.Internat. Mtg., Soc. Expl. Geophys., Expanded Abstracts,64 – 67.
    Seriff, A. J., and Kim, W. H., 1970, The effect of harmonic distortion in the use of vibratory surface sources:Geophysics, 35(2), 234 – 246.
    Sicking, C., Fleure, T., Nelan, S., and McLain, B., 2009Slip sweep harmonic noise rejection on correlated shodata: 79th Ann. Internat. Mtg., Soc. Expl. Geophys.Expanded Abstracts, 36 – 40.
    Sorkin, S. A., 1972, Sweep signal seismic exploration: U. S.Patent 3 786 409.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心