宁波国际会展中心主展厅结构设计
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
宁波国际会展中心主展厅大跨度屋盖支承条件复杂 ,风荷载效应显著。通过风洞试验确定屋盖的风压分布情况 ,在网壳结构的部分钢管中填充混凝土以平衡部分风吸力。采用抗震球形钢支座克服支座相对位移对屋盖结构产生的影响
The supporting conditions for the large span roof of Main Hall in Ningbo International Conference & Exhibition Center are very complicated,and response of the structure under wind loads is significant.The distribution of wind pressure on the roof is determined by wind tunnel test.The method that the hollow sections of structural members are filled with concrete for counteracting a part of upward wind forces is innovated.Special bearing devices are adopted to overcome differential displacements between the bearings that are fixed on the tops of the five independent buildings and several cantilever columns extended from ground level.
引文
1中国化学工程南京岩土工程公司.宁波国际会展中心岩土工程勘察报告(2001—21—k140).2001,8.
    2浙江省工程地震研究所.宁波国际会议博览中心工程场地地震安全性评价工作研究报告(2001GD0013).2001,7.
    3建筑结构荷载规范(GB50009—2001).
    4范 重,毕 磊,贾 毅等.宁波国际会展中心风洞试验研究.建筑结构,2003,33(6).
    5杨庆山,沈世钊,何成杰.悬索结构风振系数计算.哈尔滨建筑大学学报,1995,28(6).
    6林颖儒,徐晓明,黄本才等.上海虹口足球场大悬挑钢屋盖结构自振特性和风振动力特性响应分析.空间结构,2001,7(3).
    7何艳丽,董石麟,龚景海.大跨空间网格结构风振系数探讨.空间结构,2001,7(2).
    8范 重.现代大跨度结构设计中的关键技术.见:中国建筑设计研究院成立50周年纪念丛书—论文篇,清华大学出版社,2002.
    9崔 玲,徐国彬,高 日等.3500吨及超重承载能力球形抗震钢支座的研制.见:第六届空间结构学术会议论文集,地震出版社,1992
    10崔 玲,徐国彬.万向承载、万向转动、抗震、减振球形钢支座.见:第九届空间结构学术会议论文集,浙江,2000.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心