基于Michelson干涉原理的光纤加速度计的研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
分析了一种迈克尔逊干涉型光纤加速度计的结构设计和工作原理,详细推导了被测信号的加速度与迈克尔逊干涉仪的输出相位差之问的关系,并对加速度的灵敏度进行了相应的参数讨论,最后应用Matlab软件对光信号处理电路进行了仿真;结果表明,解调信号和待测信号相位一致性好,从而从理论上证明了这种结构新颖、体积小、精度高、成本低的干涉型光纤加速度计是合理可行的。
The principle and design of a fiber -optic accelerometer based on Michelson interferometry are described. Then the mathematical relationships between the acceleration signal and the output phrase are presented in detail, and related parameters are discussed subsequently. Finally, the signal processing system is simulated by Matlab software. The results of simulation show that the signal to be measured and the demodulated signal have a good phase agreement.
引文
[1]丁桂兰,刘振富,等.顺变柱体型全光纤加速度检波器 敏感元件[J].光子学报,2000,29(1):171-174.
    [2]丁桂兰,刘振富,等.三分量光纤加速度地震检波器的设计[J]. 光电子激光,2002,13(1):50-52.
    [3]陈才和,丁挂兰,等.全光纤加速度检波器信号处理系统[J]. 天津大学学报,1999,32(3):315-318.
    [4]王惠南.采用GRIN透镜之光纤加速度汁原理分析[J].光子学 报,1995,24(1):18-24.
    [5]张志鹏.光纤传感器原理[M].北京:中国计量出版社,1991.
    [6]张志涌,徐彦琴,等.MATLAB教程[M].北京:北京航空航 天大学出版社,2001.
    [7]陈亚勇.MATLAB信号处理详解[M].北京:人民邮电出版 社,2002.
    [8] Marty J, Malki A, Renouf C. et al. Fibre-optic accelerometer u-sing silicon micromachining techniques [J]. Sensors and Actuators, 1995: 470-473.
    [9]宋君恩.应用梯度折射率透镜的数字式光纤加速度计[D].南京 航天航天大学自动化学院,1999.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心