考虑屈曲后强度的钢板剪力墙极限剪力计算

英文篇名：CALCULATION OF STEEL PLATE SHEAR WALL′S ULTIMATE SHEAR CAPACITY WHICH CONSIDERING THE POST-BUCKLING STRENGTH
中文刊名：钢结构
英文刊名：Steel Construction
作者：万红霞 ; 谢伟平 ; 王小平
英文作者：Wan Hongxia Xie Weiping Wang Xiaoping(Wuhan University of Technology Wuhan 430070)
中文关键词：钢板剪力墙 ; 极限剪力 ; 剪切屈曲 ; 屈曲后强度 ; 拉力场
英文关键词：steel plate shear wall ultimate shear capacity shear buckling post-buckling strength tension field
出版日期：2004-06-30
机构：武汉理工大学,武汉理工大学,武汉理工大学武汉430070 ,武汉430070 ,武汉430070
年：2004
期：03
出版单位：钢结构

摘要

对多高层钢结构中钢板剪力墙的极限抗剪承载力进行了计算和分析 ,给出了钢板剪力墙剪切屈曲剪力、受剪屈曲后拉力场所承担剪力以及考虑框架杆件作用的极限剪力计算公式。利用文中所给公式对不同尺寸的剪力墙进行了计算 ,计算表明 ,对于宽厚比较大的钢板 ,屈曲后拉力场承担的剪力远远大于屈曲剪力 ,按考虑屈曲后强度设计较合理和经济
The ultimate shear capacity of steel plate shear wall in multi-story steel structures is calculated and analyzed in this paper.It is presented that the calculation equations of steel plate shear wall′s buckling shear,post-buckling shear provided by tension field and ultimate shear which considering the contribution of frames.Steel plate shear walls with different dimensions are calculated.The results show that for the steel plates with large width-thickness ratio post-buckling shear is much greater than buckling shear.The design of steel plate shear wall considering the post-buckling strength is more reasonable and economical.

引文

1　DriverRG SteelPlateShearWallNowPerformingontheMainStageModernSteelConstruction,2001(9):48～58
    2　DriverRG RecentDevelopmentsandFutureDirectionsinSteelPlateShearWallResearchIn:NorthAmericanSteelConstructionConference2001
    3　TimlerPA DesignEvolutionandStateoftheArtDevelopmentofSteelPlateShearWallConstructioninNorthAmericaIn:SEAOC2000Convention2000197～208
    4　RobertsTM 钢板剪力墙的地震抗力李玉亭,译世界地震工程,1996(3):88～96
    5　苏幼坡,等薄钢板剪力墙抗震性能试验研究地震工程与工程振动,2002,22(4):81～84
    6　LubellAS UnstiffenedSteelPlateShearWallPerformanceunderCyclicLoadingJ StructEngrg,2000,126(4):453～460
    7　GaylordEH DesignofSteelStructuresNewYork:McgrawHill,1992
    8　DriverRG FEandSimplifiedModelsofSteelPlateShearWall.J .Struct.Engrg,1998,124(2):121～130
    9　陈绍蕃钢结构设计原理北京:科学出版社,1998
    10　JohnstonBG 金属结构稳定设计准则解说董其震,等译北京:中国铁道出版社,1981