水平力下板柱结构等代梁等效宽度系数的研究

英文篇名：Study on Equivalent Width Coefficient of Equivalent Beam in Flat Plate Structures Under Horizontal Force
中文刊名：南京航空航天大学学报
英文刊名：Journal of Nanjing University of Aeronautics & Astronautics
作者：吴强 ; 程文瀼
英文作者：Wu Qiang~1 ; Cheng Wenrang~2(1.College of Aerospace Engineering ; Nanjing University of Aeronautics & Astronautics ; Nanjing ; 210016 ; China ; 2.College of Civil Engineering ; Southeast University ; Nanjing ; 210096 ; China)
中文关键词：板柱结构 ; 等代梁 ; 等效宽度系数 ; 受扭构件 ; 刚度比
英文关键词：flat plate structure ; equivalent beam ; equivalent width coefficient ; torsional member ; stiffness ratio
出版日期：2006-04-30
机构：南京航空航天大学航空宇航学院,东南大学土木工程学院南京210016,南京210096
年：2006
期：02
出版单位：南京航空航天大学学报

摘要

指出了水平力作用下板柱结构的等代梁应是变截面梁,与柱相交处的等代梁宽度比跨中的小;同时按刚度相等原则,给出了折算成等截面等代梁宽度的计算方法。提出了影响等代梁等效宽度系数的主要因素为受扭构件的抗扭刚度与板的抗弯刚度的比值,并通过弹性有限元分析,给出了以这个比值作为参数的板柱结构内框架和边框架等代梁等效宽度系数计算公式。
The width of the equivalent beam is the key question when flat plate structures are calcuated by the equivalent frame.It is pointed out that the equivalent beam is a differ-section beam,and the width of the equivalent beam of slabs intersected with the column is smaller than that of midspan slabs as flat plate structures under the horizontal force.The method for calculating the equal-section equivalent beam width is presented and the stiffness of the equivalent beam equals to the slab stiffness.Results show that the equivalent width coefficient is mainly influenced by the ratio of the torsional stiffness of the torsional member to the flexure stiffness of the slab.And calculating formulas of the equivalent width coefficient for the interior and the exterior frames of the flat plate structure are given by the elastic finite element analysis.

引文

[1]Peckno ld,D av id A.S lab effective w idth forequ iva len t fram e ana lys is[J].AC I Journa l,1975,72(5):135-137.
    [2]A llen F,D arva ll P.L atera l load equ iva len t fram e[J].AC I Journa l,1977,74(7):294-299.
    [3]E lias,Z iad M.S idesw ay ana lys is of flat p latestructures[J].AC I Journa l,1979,76(3):421-442.
    [4]E lgabry A de lA,Am in G.M om en t transfer by shearin slab-co lum n connections[J].AC I S tructura lJourna l,1996,93(2):187-196.
    [5]李俊兰,吕西林,周德源.地震作用下板柱结构等代框架法计算模型的研究[J].建筑结构学报,1999,20(1):39-45.
    [6]张宇峰,吕志涛.边梁对板柱结构等代框架宽度取值的影响[J].建筑结构,2001,31(2):43-46.
    [7]Luo Y H,Durran ic A J.Equ iva len t beam m ode l forflat-slab bu ild ings-Part 1:In terior connections[J].AC I S tructura l Journa l,1995,92(1):115-124.
    [8]N ilson A H,W in ter G.混凝土结构设计[M].过镇海,等译.北京:中国建筑工业出版社,1991:368-370.
    [9]Park R,G am b le W L.钢筋混凝土板[M].黄国桢,等译.上海:同济大学出版社,1992:32-37.
    [10]中国建筑科学研究院.GB 50011-2001,建筑抗震设计规范[S].北京:中国建筑工业出版社,2001.
    [11]H s iang W B.R eversed cyclic latera l load ing res is-tance of a flat p late in teriorfram e[D].W ash ington:U n ivers ity ofW ash ington,1981.