配筋混凝土砌块砌体框支剪力墙房屋模型研究
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
针对配筋混凝土砌块砌体框支剪力墙房屋子结构拟动力抗震试验,研究配筋混凝土砌块砌体框支剪力墙1∶4比例模型房屋设计与制作。综合考虑尺寸效应、构造措施、设备条件、经费可能等因素的影响,通过分析模型房屋所用材料的力学性能试验结果,以及与理论计算结果的比较,1∶4比例的模型房屋能够反映原型房屋动力性能。将原型房屋的截面和配筋,根据动力相似性原理,转换为1∶4比例模型房屋的截面和配筋,同时介绍了模型施工工艺以及所用材料。
In order to adopt substructure pseudodynamic aseismic test method in frame-supported reinforced concrete block masonry shear walls building,the design and construction of a 1∶4 scale frame supported reinforced concrete masonry shear walls building are investigated.The dimensions effect,details measure,installation term,and outlay condition are considered.The results of the material mechanics performance used by model building are analyzed and compared with the theoretical solutions.It is shown that the 1∶4 scale model building can respond the dynamic characteristic of the prototype building completely.Based on the dynamic similar principle,the member section and reinforcement of prototype building are converted into 1∶4 scale model building's.Moreover,the materials and construction methods are introduced.
引文
[1]朱伯龙.结构抗震试验[M].北京:地震出版社,1989.
    [2]姚谦峰,陈平.土木工程结构实验[M].北京:中国建筑工业出版社,2001.
    [3]建筑抗震设计规范(GB50011—2001)[S].
    [4]高层建筑混凝土结构技术规程(JGJ3—2002)[S].
    [5]砌体结构设计规范(GB50003—2001)[S].
    [6]砌体基本力学性能试验方法标准(GBJ129—90)[S].
    [7]普通混凝土力学性能试验方法标准(GB/T50081—2002)[S].
    [8]H G HARRIS,G M SABNIS.Structural Modeling and Experimental Techniques(2nd ed)[M].CRC Press LLC,Florida,1999.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心