框-剪结构剪力墙局部中断的设计探讨
详细信息 本馆镜像全文    |  推荐本文 | | 获取馆网全文
摘要
通过分析框-剪结构的协同工作原理,从概念上探讨了剪力墙局部中断的合理性。结合2个工程实例,对剪力墙局部中断与均通至顶部两种情况的周期、位移、刚度比、配筋等方面进行比较,结果表明剪力墙局部中断对结构侧向刚度的影响可以忽略、顶部位移有所减小,抗震性能反而略优。采用此方法,可以减少混凝土用量,节约工程造价,可供类似工程参考。
Based on the analysis of interaction in frame-shear wall structures,the reasonabability of partial interruption of shear walls was discussed on design concepts.The comparison analysis of period,displacement,stiffness ratio and reinforcement on different conditions with partial shear wall interruption and all shear walls up to roof was performed based on two practical engineering projects.The results show that the influence of partial shear wall interruption on lateral stiffness of the structure can be neglected,roof displacement can be reduced slightly and the seismic performance is enhanced slightly.Volume of concrete can be reduced and the project cost can be cut accordingly by using this method.
引文
[1]王全风,张波.含断层剪力墙框-剪结构的楼层地震剪力[J].华侨大学学报,2001,22(4):389-393.
    [2]王全凤,张波,罗漪.框-剪结构剪力墙中断和楼层刚度[J].建筑结构,2003,33(5):39-41.
    [3]方德平,王全凤.变刚度框剪结构地震反应的层单元分析[J].建筑结构,2005,35(11):36-38.
    [4]冯宏团,张海龙.框-剪结构剪力墙中断分析[J].建筑结构,2005,35(12):45-46.
    [5]中国建筑科学研究院.JGJ3-2002高层建筑混凝土结构技术规程[S].北京:中国建筑工业出版社,2002.

版权所有:© 2023 中国地质图书馆 中国地质调查局地学文献中心