岩石结构面抗剪强度MTS三轴试验方法研究

详细信息    查看全文 | 推荐本文 |

英文篇名：A Method of Determining Shear Strength of Rock Discontinuities Through Triaxial Test 作者：荀晓慧 ; 魏玉峰 ; 符文熹 ; 张斌 英文作者：XUN Xiao-hui;WEI Yu-feng;FU Wen-xi;ZHANG Bin;State Key Laboratory of Geohazard Prevention and Geoenvironment Protection, Chengdu University of Technology;State Key Laboratory of Hydraulics and Mountain River Engineering,Sichuan University;China Huaxi Engineering Design & Construction Co., Ltd.; 关键词：无充填岩石 ; 结构面 ; 抗剪强度 ; 三轴试验 ; 取值方法 英文关键词：non-filled rock;;discontinuity;;shear strength;;triaxial test;;determining method 中文刊名：长江科学院院报 英文刊名：Journal of Yangtze River Scientific Research Institute 机构：成都理工大学地质灾害防治与地质环境保护国家重点实验室;四川大学水力学及山区河流保护国家重点实验室;中国华西工程设计建设有限公司; 出版日期：2019-07-15 出版单位：长江科学院院报 年：2019 期：07 基金：国家重点研发计划项目(2017YFC1501000);; 四川省教育厅资助科研项目(18ZA0045);; 地质灾害防治与地质环境保护国家重点实验室自主研究课题(SKLGP2016Z016) 语种：中文; 页：100-103+109 页数：5 CN：42-1171/TV ISSN：1001-5485 分类号：TU45

摘要

尝试在电液伺服岩石试验系统(MTS)上对无充填岩石节理试件进行三轴试验,该试验方法可利用一个结构面试样获得多组抗剪强度数据,克服了结构面直剪试验取样困难、试验结果离散性大等缺点,方法更为简单、快速。在此基础上,除对每一试件的试验结果按线性Mohr-Coulomb准则获得摩擦角和内聚力外,还对比分析了线性Mohr-Coulomb准则拟合、幂函数拟合和非线性Barton公式拟合结果,并对提出的试验方法进行了可靠性验证,最后分析了试验方法的适用范围。幂函数拟合和Barton公式拟合能够反映岩石节理剪切强度的非线性特征,优于Mohr-Coulomb准则;当0.01<σ_(nj)/JCS<0.3时,幂函数拟合和Barton公式拟合岩石结构面剪切强度比较可靠,而当σ_(nj)/JCS>0.3时获得的剪切强度偏高。
        A simple and rapid method of triaxial test on non-filled rock specimens containing irregular discontinuities by using rock mechanics test system(MTS) is presented in this paper. Multiple shear strength data can be obtained by using this method in the presence of only one single specimen. The difficulty of preparing test specimen is overcome and the highly discrete test results can be avoided. In addition, approaches to determine the parameters of linear Mohr-Coulomb criterion fitting, power function fitting and nonlinear Barton equation fitting according to test results are examined and the results of different approaches are compared to verify the rationality of the method. The application scope of the test method is also put forward. Results suggest that power function fitting and nonlinear Barton equation fitting are superior to Mohr-Coulomb criterion in reflecting the nonlinearity of shear strength of jointed rock. When 0.01<σ_(nj)/JCS<0.3, the result of shear strength of jointed rock obtained by the two fitting methods are reliable; when σ_(nj)/JCS>0.3, the result is larger.

引文

[1] LAM T S K,JOHNSTON I W.Shear Behavior of Regular Triangular Concrete/Rock Joints—Evaluation[J].Journal of the Geotechnical Engineering Division,Proceedings of American Society of Civil Engineering,1989,115(5):728-740.
    [2] HENCHER S R,RICHARDS L.Laboratory Direct Shear Testing of Rock Discontinuities[J].Ground Engineering,1989,22(2):24-31.
    [3] 李克钢,许江,李树春.三峡库区岩体天然结构面抗剪性能试验研究[J].岩土力学,2005,26(7):1063-1067.
    [4] BARTON N.Review of a New Shear Strength Criterion for Rock Joints[J].Engineering Geology,1973,7(4):287-332.
    [5] 邹宗兴,唐辉明,刘晓,等.制样误差对结构面直剪试验结果影响定量研究[J].岩石力学与工程学报,2010,29(8):1664-1669.
    [6] 雍睿,胡新丽,唐辉明,等.岩体结构面直剪试验制样误差效应研究[J].中南大学学报(自然科学版),2013,44(11):4643-4651.
    [7] WINES D R,LILLY P A.Estimates of Rock Joint Shear Strength in Part of the Fimiston Open Pit Operation in Western Australia[J].International Journal of Rock Mechanics and Mining Sciences,2003,40(6):929-937.
    [8] LIU Y,XIA C C.Advances in Research of Rock Masses Containing Discontinuous Joints in Direct Shear Test[J].Rock and Soil Mechanics,2007,28(8):1719-1724.
    [9] 孙辅庭,佘成学,万利台.Barton标准剖面JRC与独立于离散间距的统计参数关系研究[J].岩石力学与工程学报,2014,33(增2):3539-3544.