3D打印机G代码预处理优化算法

详细信息    查看全文 | 推荐本文 |

英文篇名：G Code Preprocessing Optimization Algorithm for 3D Printers 作者：余道洋 英文作者：YU Daoyang;School of Mechanical Engineering,Hefei University of Technology; 关键词：3D打印 ; 预处理 ; 前瞻算法 ; 速度规划 英文关键词：3D print;;preprocessing;;look-ahead algorithm;;speed planning 中文刊名：中国机械工程 英文刊名：China Mechanical Engineering 机构：合肥工业大学机械工程学院; 出版日期：2019-01-03 14:39 出版单位：中国机械工程 年：2019 期：01 基金：国家自然科学基金资助项目(51275147);; 合肥工业大学博士基金资助项目(JZ2015HGBZ0094) 语种：中文; 页：89-93+116 页数：6 CN：42-1294/TH ISSN：1004-132X 分类号：TP334.8

摘要

为了突破现有3D打印机控制系统原有的文件处理模式的限制,提出将G代码程序在PC端先行预处理的方法。在程序预处理过程中,同时对多段微小线段进行前瞻控制和速度规划;预处理结束后,再将处理结果输入3D打印机执行打印操作。该方法减少了3D打印机处理器负担,且通过PC端预处理可以得到更优化的计算结果。实验测量数据证明:G代码预处理方法与传统G代码处理方法相比,节省了打印机处理器处理时间,同时提高了打印品质。
        In order to break the limitations of the original file processing mode of the existing 3D printer control systems,a method of preprocessing the G codes on the PC side in advance was proposed.In the program preprocessing processes,the forward control and speed planning of multiple segments were carried out at the same time.After finishing the preprocessing,the output data were sent to the 3Dprinters for executing printing.The methods reduce the loads of the 3Dprinter processors and obtain more optimized calculation results through PC-side preprocessing.Finally experimental measurement data prove that,the G code preprocessing methods save the processing time of the printer processors and improve the printing quality compared with the traditional G code processing methods.

引文

[1] BOUHAL A,JAFARI M A,HAN Wenbiao,et al.Tracking Control and Trajectory Planning in Layered Manufacturing Applications[J].IEEE Trans.on Industrial Electronics,1999,46(2):445-451.
    [2] GUERRERO-de-MIER A, ESPINOSA M M,DOMNGUEZ M.Azara:a New 32 Bit RepRap with Improved Performance[J].Procedia Engineering,2015,2015(132):118-125.
    [3]宗殿栋,汪地,李卫成,等.基于Marlin固件桌面级3D打印机自动调平装置设计[J].工业控制计算机,2016,29(4):85-88.ZONG Diandong,WANG Di,LI Weicheng,et al.Design of Automatic Leveling Device Based on Marlin Firmware Desktop 3D Printer[J].Industrial Control Computer,2016,29(4):85-88.
    [4]卞扬清.一种小型FDM三维打印机控制系统研究与实现[D].南京:东南大学,2015.BIAN Yangqing.The Research and Implementation of the Control System of a Small FDM 3DPrinter[D].Nanjing:Southeast University,2015.
    [5] JIN Yuan,HE Yong,FU Jianzhong,et al.A Fineinterpolation-based Parametric Interpolation Method with a Novel Real-time Look-ahead Algorithm[J].Computer-Aided Design,2014,55(10):37-48.
    [6]陈友东,王田苗,魏洪兴,等.数控系统的直线和S形加减速研究[J].中国机械工程,2006,17(15):1600-1604.CHEN Youdong,WANG Tianmiao,WEI Hongxing,et al.Linear and S-shape Acceleration and Deceleration for CNC Machine Tools[J].China Mechanical Engineering,2006,17(15):1600-1604.
    [7] DENIZ S E,ALEXANDER Y,YUSUF A.Synchronized Material Deposition Rate Control with Path Velocity on Fused Filament Fabrication Machines[J].Additive Manufacturing,2018,19(1):205-213.