行星搅拌器流场仿真与混合分析

详细信息    查看全文 | 推荐本文 |

英文篇名：Flow Field Simulation of Planetary Mixer and Analysis on Mixing Performance 作者：林赫超 ; 何延东 ; 朱向哲 ; 王天书 英文作者：LIN He-chao;HE Yan-dong;ZHU Xiang-zhe;WANG tian-shu;School of Mechanical Engineering,Liaoning Shihua University; 关键词：行星式搅拌器 ; 混合效率 ; 剪切速率 ; 拉伸指数 英文关键词：Planetary mixer;;Mixing efficiency;;Shear rate;;Stretch logarithm 中文刊名：当代化工 英文刊名：Contemporary Chemical Industry 机构：辽宁石油化工大学机械工程学院; 出版日期：2019-01-28 出版单位：当代化工 年：2019 期：01 基金：国家自然科学基金(51473073,51303075) 语种：中文; 页：202-207 页数：6 CN：21-1457/TQ ISSN：1671-0460 分类号：TQ051.72

摘要

建立了三维行星式搅拌器的有限元模型,应用Polyflow软件对流场进行模拟,对不同转速下的搅拌器内糖浆的混合流动进行了对比分析,同时对中心区和销附近区域的混合效果进行对比。结果表明,搅拌器不存在流动混合的死区,且销附近区域的混合能力比中心区的混合能力更强,流场内的粒子始终受到周期性的折叠和拉伸作用;转速越大,搅拌器内的流体混合效果越好。
        The three-dimensional finite element model of planetary mixer was established and the flow field was simulated by using Polyflow software, the mixing flow of syrup in the mixer at different speeds was compared and analyzed. Besides, the effect of mixing in the central area and the region near the pin was compared. The results showed that there was not a dead zone of flow mixing in the mixer and the mixing capacity in the region near the pin was stronger than that in the center. The particles in the flow field were always subjected to periodic folding and stretching. The faster the pin speed was, the better the mixing effect in the mixer was.

引文

[1]宋吉昌,李庆领,杨洪顺行星轮式搅拌器及其性能分析[J].化工机械,2009,36(4):347-350.
    [2]任春华,林朝阳,周国成.行星搅拌机的性能特点及其发展[J].泸天化科技,2011(1):54-62.
    [3]陈明义.新型行星式搅拌器开发及性能研究[J].化学工程,2010,38(7):47-50.
    [4]陈勇棠,蒲明辉,CHENYong-tang,等.基于UGNX的外啮合行星搅拌机运动特性研究[J].柳州职业技术学院学报,2017(4):114-120.
    [5]Jongen T.Characterization of batch mixers using numerical flow simulations[J].Aiche Journal,2000,46(11):2140-2150.
    [6]Connelly R K,Valenti-Jordan J.Mixing analysis of a Newtonian fluid in a 3D planetary pin mixer[J].Chemical Engineering Research&Design,2008,86(12):1434-1440.
    [7]Connelly R K,Kokini J L.Mixing simulation of a viscous Newtonian liquid in a twin sigma blade mixer[J].Aiche Journal,2006,52(10):3383-3393.
    [8]朱霖龙,刘雅文,赵利军.长幅内旋轮线行星搅拌机研究[J].工程机械,2013,44(4):13-18.
    [9]杨伶,彭炯,王晓瑾.行星式搅拌釜内三维流场的数值模拟[J].化工进展,2011(s1):42-48.
    [10]王超明,郑茂盛,田忠,等.行星轮式搅拌器搅拌特性分析[J].化工机械,2016,43(6):791-797.
    [11]余彬彬,杨建勇,刘强.不同射流速度的油罐旋转喷射搅拌器数值模拟[J].当代化工,2015(6):1412-1414.
    [12]Zhu X Z,Wang T S,Wang G.Evaluations of Flow and Mixing Efficiency in the Kneading Disks of a Novel Tri-Screw Extruder[J].Journal of Applied Fluid Mechanics,2016,9(1):51-60.