铀尾砂膏体充填材料的流动性能研究

详细信息    查看全文 | 推荐本文 |

英文篇名：Flow Properties of Uranium Tailings as Paste Backfill 作者：冯胜洋 ; 崔宇 ; 许田贵 ; 谭国炽 ; 汪弘 英文作者：FENG Sheng-yang;CUI Yu;XU Tian-gui;TAN Guo-chi;WANG Hong;School of Environment and Safety Engineering, University of South China;Engineering Research Center for Decommissioning of Uranium Tailings Reservoir of Hunan Province; 关键词：铀 ; 铀尾砂 ; 膏体充填 ; 管道输送 ; 流动性 ; 坍落度 ; 粘度 英文关键词：uranium;;uranium tailings;;paste backfill;;pipeline transportation;;flowability;;slump;;viscosity 中文刊名：矿冶工程 英文刊名：Mining and Metallurgical Engineering 机构：南华大学环境与安全工程学院;湖南省铀尾矿库退役治理工程技术研究中心; 出版日期：2019-04-15 出版单位：矿冶工程 年：2019 期：02 基金：国家自然科学基金(11705083);; 中国博士后科学基金面上项目(2018M632976);; 金属矿山安全与健康国家重点实验室开放课题(2016-JSKSSYS-08) 语种：中文; 页：8-12 页数：5 CN：43-1104/TD ISSN：0253-6099 分类号：TD853.34

摘要

对不同灰砂比、膏体浓度、减水剂含量的铀尾砂膏体充填材料进行了坍落度试验和粘度试验,并结合CFD方法对铀尾砂膏体充填材料流动性能进行了数值模拟研究。试验结果表明,铀尾砂膏体充填材料满足管道输送的最优配比为:质量浓度75%、灰砂配比1∶5、减水剂含量0.6%～4.4%;最优配比下屈服应力53.96～131.38 Pa,塑性粘度0.866～1.325 Pa·s。数值模拟结果表明,铀尾砂膏体充填材料的管道阻力损失随质量浓度增加呈非线性增大,随流速增加呈线性增大,随管径增加呈非线性减小,随管道弯曲半径增加呈非线性减小。
        Slump tests and viscosity tests were carried out for the uranium tailings paste backfill with different cement-sand ratio, mass concentration of paste and water reducer content, and the flow properties of uranium tailings as paste backfill were studied by using numerical simulation combined with CFD method. The test results showed that the uranium tailings backfill could satisfy the requirement for pipeline transportation, when prepared with the optimal proportion, including mass concentration of 75%, cement-sand ratio of 1∶ 5, water reducer content of 0.6%～4.4%, resulting in the yield stress at 53.96～131.38 Pa, and the plastic viscosity at 0.866～1.325 Pa·s. The numerical simulation results showed that the pipeline resistance loss for uranium tailings paste backfill increased nonlinearly with the increasing of the mass concentration, linearly with the increase of the flow velocity, but decreased nonlinearly with an increase in the diameter and the bending radius of the pipe.

引文

[1] IAEA.The long term stabilization of uranium mill tailings[R].International Atomic Energy Agency,IAEA TEC-DOC-1403,Vienna,2004.
    [2] 占凌之,朱晓杰,高柏,等.南方某尾矿库浅层尾砂中铀分布特征[J].有色金属(矿山部分),2014,66(3):45-47.
    [3] Alexandrou A N,Duc E,Entov V.Inertial,viscous and yield stress effects in Bingham fluid filling of a 2-D cavity[J].Journal of Non-Newtonian Fluid Mechanics,2001,96(3):383-403.
    [4] 张淑会,薛向欣,刘然,等.尾矿综合利用现状及其展望[J].矿冶工程,2005,25(3):44-47.
    [5] 吴爱祥,王勇,王洪江.膏体充填技术现状及趋势[J].金属矿山,2016(7):1-9.
    [6] Gharib N,Bharathan B,Amiri L,et al.Flow characteristics and wear prediction of Herschel-Bulkley non-Newtonian paste backfill in pipe elbows[J].Canadian Journal of Chemical Engineering,2016.https://doi.org/10.1002/cjce.22749.
    [7] 吕宪俊,金子桥,胡术刚,等.细粒尾矿充填料浆的流变性及充填能力研究[J].金属矿山,2011,40(5):32-35.
    [8] 郑娟荣,吕杉杉,赵振波.全尾砂膏体料浆流动性影响因素的试验研究[J].金属矿山,2013(9):37-40.
    [9] 王五松.膏体充填流变特性及工艺研究[D].阜新:辽宁工程技术大学安全科学与工程学院,2004.
    [10] 张宗生.金川矿山废石膏体配制与流变特性研究[D].昆明:昆明理工大学国土资源与工程学院,2008.
    [11] NB/T 51070-2017,煤矿膏体充填材料试验方法[S].
    [12] 吴爱祥,王洪江.金属矿膏体充填理论与技术[M].北京:科学出版社,2015.
    [13] 吴爱祥,焦华喆,王洪江,等.膏体尾矿屈服应力检测及其优化[J].中南大学学报(自然科学版),2013(8):3370-3376.