超临界二氧化碳在PVC行业中微孔发泡研究进展

详细信息    查看全文 | 推荐本文 |

英文篇名：Progress of Supercritical Carbon Dioxide in Microcellular Foaming in PVC Industry 作者：管述哲 ; 刘宣池 ; 吴咏梅 ; 吴进喜 ; 张玉双 ; 董孝宇 英文作者：Guan Shuzhe;Liu Xuanchi;Wu Yongmei;Wu Jinxi;Zhang Yushuang;Dong Xiaoyu;Department of Chemistry and Engineering,Xinjiang Institute of Engineering; 关键词：超临界二氧化碳 ; PVC ; 微孔发泡 ; 发泡制品 英文关键词：supercritical carbon dioxide;;PVC;;microcellular foaming;;foamed products 中文刊名：山东化工 英文刊名：Shandong Chemical Industry 机构：新疆工程学院; 出版日期：2019-01-23 出版单位：山东化工 年：2019 期：02 基金：新疆工程学院院内基金(2018gcxyjg001);; 国家自然科学基金青年基金(51562036);; 自治区级大学生创新培训项目(201710994059) 语种：中文; 页：71-72+76 页数：3 CN：37-1212/TQ ISSN：1008-021X 分类号：TQ328.0

摘要

介绍了PVC发泡制品行业的发展状况,综述了超临界二氧化碳对PVC发泡制品的发泡机理以及发泡方法,比较了作为一种新型材料的发泡PVC的不易燃、质轻、热导率低、隔音效果好、缓冲性能和比强度高等特性。介绍了PVC发泡材料主要产品在室内外的应用,并对行业的发展提出了建议。
        The development status of rigid foamed PVC products industry was introduced,and described the foaming mechanism and method of foamed PVC products by supercritical carbon dioxide.It was indicated that as a new type material,foamed PVC materials had the advantages of fire-retardant,light weight,low thermal conductivity,good sound insulation,better buffer performance and high strength.It was mainly introduced that PVC materials were used for interior and exterior decoration,also the suggestions on the development of the industry were proposed.

引文

[1]Mills N J.Deformation mechanisms and the yield surface of low-density,closed-cell polymer foams[J].Journal of Materials Science,2010,(21):5831-5843.
    [2]谷亚新,李萍,刘运学,等.ACR加工改性剂对聚氯乙烯加工性能和力学性能的影响[J].新型建筑材料,2010(4):68-71.
    [3]相益信.三聚氰胺甲醛树脂泡沫的研究[D].青岛:青岛科技大学,2011.
    [4]李玉芳,李明.聚氯乙烯增韧改性的研究开发进展[J].塑料制造,2011(5):88-92.
    [5]焦雷,陈聪,陈程,等.交联型PVC/TPU轻质材料的制备和表征[J].高分子学报,2012(5):513-520.
    [6]LIU T,ZHOU S Y,LEI Y J,et al.Morphology and Properties of Injection Molded Microcellular Poly(Ether Imide)(PEI)/Polypropylene(PP)Foams[J].Industrial and Engineering Chemistry Research,2014,53(51):19934-19942.
    [7]MATUANA L M,DIAZ C A.Strategy to produce microcellular foamed poly(lactic acid)/wood-four composites in a continuous extrusion process[J].Industrial and Engineering Chemistry Research,2013,52(34):12032-12040.
    [8]PETCHWATTANA N,COVAVISARUCH S,PITIDHAMMABHORN D.Influen-ces of water absorption on the properties of foamed poly(vinyl vhloride)/rice hull composites[J].Journal of Polymer Research,2013,20(6):172-185.
    [9]Kowalczyk M,Piorkowska E,Pluta M,et al.Plasticization o polylactide with block copolymers of ethylene glycol and propylene glycol[J].J Appl Polym Sci,2012,125(6):4292-4301.
    [10]史爱华,张广成,马忠雷,等.低密度交联硬质聚氯乙烯泡沫塑料的研究[J].应用化工,2011(02):287-290.
    [11]徐朝阳,刘庆德,刘庆峰.聚氯乙烯/杨木粉模压发泡材料的制备及性能研究[J].包装工程,2015,13(36):5-8.
    [12]胡军.连续挤出成型微型发泡PVC板材的配方设计与工艺探讨[D].广州:华南理工大学,2011.4.
    [13]杨波,刘东辉.硬脂酸钙和硬脂酸锌对PVC/AC配方体系发泡温度的影响[J].应用化工,2006(6)435-437
    [14]程乐利,姚跃飞,唐晓杰,等.软性PVC基隔音复合材料的阻燃性研究[J].浙江理工大学学报,2011(02):160-164.
    [15]郝长印,孟得惠子,严正.超临界二氧化碳发泡软质聚氯乙烯材料的性能研究[J].工程塑料应用,2015(2)95-100.
    [16]连荣炳.软质聚氯乙烯发泡材料的研究[D].成都:四川大学,2006,4.
    [17]曹沛,刘莉.NBA/PVC橡塑共混发泡材料的影响因素研究[J].弹性体,2012(4):61-65.