摘要
在现代化社会的发展中,韶钢企业需要采取相应的优化措施,实现降本增效的预期目标,有效地降低燃料的消耗量。因此,该企业相关部门需要根据企业的实际情况和规划,只开宽板工序1号加热炉,再对宽板工序进行二次设备改造,实现了二切坯料热装,这样不仅降低了燃料的消耗量,还减少了人工和资金的投入,在很大程度上提升了切割的效率。
In the development of the modern society, Shaogang needs to take corresponding optimization measures to achieve the expected goal of reducing cost and increasing efficiency, and effectively reducing the fuel consumption. Therefore, according to the actual situation and planning of the enterprise, the relevant departments of the enterprise need to open only the No. 1 heating furnace of the wide board process, and then carry out the transformation of the secondary equipment of wide plate process, thus to realizing the hot charging of secondary cutting blank. This not only reduces the consumption of fuel, but also reduces the investment of labor and capital, which greatly improves the efficiency of cutting.
引文
[1]王金星.轧钢连轧工序节能降耗的实践[J].工业炉,2017(1):17.